Industry Directory | Manufacturer
Manufacturer of satellites and parts for the space industry.
Industry Directory | Manufacturer / Other
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. We design, manufacture, and launch Earth's most advanced rockets and spacecraft.
Simplify Dispensing with GPD Global’s Island Series Dispense Platforms Island Series robots give you versatility to do simple, repetitive automation jobs. Work areas range from 300 mm x 400 mm to 400 mm x 400 mm. All Island Series robots are compati
New Equipment | Education/Training
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic env
Electronics Forum | Thu Dec 29 12:35:53 EST 2005 | james
Has anyone else had problems with the space saver stencils and frames. The stencil tends to bow in the middle when clamped. These are the frames with only 2 pins to hold the stencil in place. Thanks for any advice
Electronics Forum | Tue Jan 03 16:27:05 EST 2006 | Phil
I agree - beware of the cheap imitations. To date, I have had very good experience with the VectorGuard technology. A bit more pricey - but usually worth it.
Used SMT Equipment | SMT Equipment
Model No:KS-6004-S Portable conveyor Cycle time:Approx 15seconds Power supply:100-230V AC (customized), single phase Power load:Max 150V/A Air pressure: 4-6 bar Air volume:MAX 10L/minute Transport height:900±20mm (or customized) Transport di
Used SMT Equipment | Chipshooters / Chip Mounters
Product name: YV100 Ⅱ YAMAHA multi-functional SMT machine Product number: YV100 Ⅱ Products in detail YAMAHA multi-function placement machine YAMAHA YV100II The brand YAMAHA model YV100 - II Automatic manual automatic SMT speed 10000 (grain per
Industry News | 2013-01-04 15:59:09.0
04 Jan 2013 Heller Industries Shanghai will be celebrating its 10th year of operation on Jan 31, 2013.
Industry News | 2019-03-03 19:17:17.0
Whizz Systems, Inc. is pleased to announce that it has improved operational technology and increased production by implementing an automated warehouse system supplied by Juki Automation Systems. The automated warehouse, consisting of eight ISM 2000 Fortresses and an ISM 500 Intelligent Storage System, replaces Whizz’s warehouse consisting of shelving and racks while reducing the amount of space required.
Parts & Supplies | Pick and Place/Feeders
SAMSUNG stick feeder More Samsung feeder parts in stock 125X40X133MM Samaung Thimble 300X56X66MM Samaung Soft Thimble Pin J1301023 Samaung Feeder Snap spring J7066039A Samaung Feeder Spring J8100123A Samaung CP45 8X4 Feeder upper cover J70650
Parts & Supplies | Assembly Accessories
Samsung spring More Samsung feeder parts in stock 125X40X133MM Samaung Thimble 300X56X66MM Samaung Soft Thimble Pin J1301023 Samaung Feeder Snap spring J7066039A Samaung Feeder Spring J8100123A Samaung CP45 8X4 Feeder upper cover J70650956C S
Technical Library | 2020-01-06 07:54:53.0
ASCEN technology make the mini PCB magazine loader without magazine rack to save more space for most of production line,PCB mini loader can use as the PCB unloader or loading machine in different station and let the factory maximized to using the space
Technical Library | 2012-12-17 22:05:22.0
Package on Package (PoP) has become a relatively common component being used in mobile electronics as it allows for saving space in the board layout due to the 3D package layout. To insure device reliability through drop tests and thermal cycling as well as for protecting proprietary programming of the device either one or both interconnect layers are typically underfilled. When underfill is applied to a PoP, or any component for that matter, there is a requirement that the board layout is such that there is room for an underfill reservoir so that the underfill material does not come in contact with surrounding components. The preferred method to dispensing the underfill material is through a jetting process that minimizes the wet out area of the fluid reservoir compared to traditional needle dispensing. To further minimize the wet out area multiple passes are used so that the material required to underfill the component is not dispensed at once requiring a greater wet out area. Dispensing the underfill material in multiple passes is an effective way to reduce the wet out area and decrease the distance that surrounding components can be placed, however, this comes with a process compromise of additional processing time in the underfill dispenser. The purpose of this paper is to provide insight to the inverse relationship that exists between the wet out area of the underfill reservoir and the production time for the underfill process.
This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.
Simplify Dispensing with GPD Global’s Island Series Dispense Platforms Island Series robots give you versatility to do simple, repetitive automation jobs. Work areas range from 300 mm x 400 mm to 400 mm x 400 mm. All Island Series robots are compati
Training Courses | | | IPC J-STD-001 Space Trainer (CIT)
The IPC J-STD-001 Space Addendum (CIT) certification courses allow individuals to conduct Certified IPC J-STD-001 Space Addendum Specialist (CIS) training.
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS) Recert.
The Certified IPC/WHMA-A-620 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC/WHMA-A-620 Specialist.
Events Calendar | Tue Aug 22 00:00:00 EDT 2023 - Tue Aug 22 00:00:00 EDT 2023 | Boca Raton, Florida USA
Space Coast Panel Discussion: Microscope Setups, Getting the Best Results From Your Equipment
Events Calendar | Fri Feb 23 00:00:00 EST 2024 - Fri Feb 23 00:00:00 EST 2024 | Melbourne,
Space Coast Chapter Winter Golf Classic
Career Center | San Diego, California USA | Engineering
MeltroniX is a supplir of MCM/hybrids for the military and space market. We are seeking a process engineer with expertise in wire bonding, including ultrasonic and thermocompession technology.
Career Center | Littleton, Colorado USA | Engineering
Are you interested in writing software that essentially operates like an astronaut for the next generation of manned and unmanned space flight vehicles? Do you want to play a key role in developing software that will operate the next generation of
Career Center | Erode, Tamilnadu India | Engineering
Professional Summary 3+ years of experience in the PCB CAM engineering Exposure to FRONTLINE GENESIS 2000 Having exposure in UCAM Exposure to Create, Array & Panelize it for manufacturability Experienced in Creating impedance cou
Career Center | , | Sales/Marketing
Sales Engineer/Manager/Representative in electronics and publication/newspaper industries
SMTnet Express, March 12, 2015, Subscribers: 22,490, Members: Companies: 14,252 , Users: 37,867 Miniaturization with Help of Reduced Component to Component Spacing Jonas Sjoberg, Ranilo Aranda, David Geiger, Anwar Mohammed, Murad Kurwa
1st Place Machinery Inc. | http://www.firstplacemachinery.com/first_place_featured5.html
: 307918 Year 2006 Humidity Range 10 to 95% Temperature Range -35 to 85C DI Filter System Interior Space: 9 feet x 9 feet x 7' 10" Door Opening Size
KD Electronics Ltd. | http://www.kundasmt.com/?DEK/6014.html
), and a real space-saver. With two model versions, the platform now also features outstanding flexibility: the DEK TQ for boards measuring up to 400 by 400 millimeters, and the DEK TQ L for boards me DEK TQ is superfast (core cycle time: only 5 to 6.5 seconds), highly precise (±17.0 microns @ 2 Cmk