Electronics Forum | Thu Jul 22 07:30:21 EDT 2010 | nitronica1
does anyone know where I can get replacement conveyor/drive belts for a Fuji/astro pcb 0.5m conveyor? pref from the UK or europe the length of the belts are approx 630mm and 6mm wide, flat with bumps on bottom side
Electronics Forum | Tue Aug 11 15:58:10 EDT 2020 | gilbe12586
Looking for FUJI CDC-4200-2 conveyor manual, belts, and bearings.
Electronics Forum | Fri Oct 13 12:43:40 EDT 2000 | Brian
Can anyone help? We have reconfigured our production lines and I could use some help for machine communications on 2 production lines. Does anyone know how to get a handshake for the following equipment? Asm Line #1)UIC 4713D output to input Fuji
Electronics Forum | Fri Aug 25 08:12:16 EDT 2006 | davef
Leading conveyor manufacturers are ATI, Conveyor Technology, Crown Simplimatic, Dynapace, Flextek, Fuji, Jot, Kanetic, Panasonic, and Process Control.
Electronics Forum | Tue Mar 30 12:10:31 EST 2004 | caldon
SMEMA is not just conveyor height. It also is Conveyor width, Edge Clearance, Tooling pins, Maximun Machine gap, and Lead in of conveyor. Additional, SMEMA is a machine communications Protocol for machine to machine or machine to conveyor communicati
Electronics Forum | Mon Oct 01 14:42:18 EDT 2001 | Doug Sanders
Dan, Fuji has the NP XL series that will allow 27 by 23 inche boards using a conveyor.
Electronics Forum | Tue May 06 07:29:10 EDT 2008 | cyber_wolf
I am looking at NEW connecting conveyors for our Fuji lines. So far I have looked at Simplimatic,Promation,and Jot. There seems to be a large spread in pricing. Has anyone out there purchased new conveyors lately..if so what is your take on it ? I
Electronics Forum | Tue Oct 01 05:10:20 EDT 2013 | anilw2006
Please go to output from I/O option and press on/off option in the main conveyor. While on condition motor should on when off motor should stop.If this will not happen then need to change I/o card.
Electronics Forum | Sat Sep 28 15:58:38 EDT 2013 | sonavc
Hi. 'm new to this Fuji CP3, I bought this machine in working condition ( I saw it ran, but I forgot to check the board in and out ).... Moved to my location, Problem: When the board is trying to load to the X-Y table, it passed the conveyor B but
Electronics Forum | Tue Oct 11 14:23:49 EDT 2005 | tttone_98
Looking to purchase SMEMA cables to connect a Fuji conveyor to a Fuji CP. Does anyone know were I could purchase them..