Electronics Forum | Tue Jan 24 05:33:25 EST 2017 | robertwillis
Did not see any emails from you and the limit is 10megs Why are you using 0.012" how thick is you board or what is t he hole to lead ratio as the thickness is high!!! Bob Willis bob@bobwillis.co.uk
Electronics Forum | Fri Mar 27 03:42:17 EDT 2020 | sssamw
Did you try 0.12 or 0.1mm nano coated stencil @ 10 mil aperture? A soak time type profile with long reflow time could help.
Electronics Forum | Tue Aug 17 10:41:13 EDT 1999 | Steve A
Wayne, Sounds like a gasketing problem. When the horizontal apertures are bleeding but not the vertical apertures. Could be poor underside support, HASL miniscus issues, masking or plugging issues, but what many people do not account for is that t
Electronics Forum | Thu Feb 12 20:36:26 EST 1998 | Jon Medernach
| Using metal squeegees on GSPs has caused premature stencil wear. Has | anyone had any success with this combination? How much snap off did you | use? We are using .5 mm pitch and have a no clean process. Stencil wear is is minimal but exists. T
Electronics Forum | Fri Sep 11 16:52:00 EDT 1998 | Dave F
0.050" -> 50 mil -> 50 pitch 0.80 mm -> 0.032" -> 32 mil -> 32 pitch 0.64 mm -> 0.025" -> 25 mil -> 25 pitch 0.50 mm -> 0.020" -> 20 mil -> 20 pitch 0.40 mm -> 0.016" -> 16 mil -> 16 pitch 0.20 mm -> 0.012" -> 12 mil -> 12 pitch Dave F
Electronics Forum | Wed Jan 14 11:30:48 EST 1998 | Pierre Atchison
I am looking for equipment that can place and reflow c-tab devices. These devices are 0.012" pitch. Universal used to make a machine for this purpose, but it has been discontinued. If anyone has any info, please let me know. Thanks, Pierre Atchison p
Electronics Forum | Thu Jan 15 09:08:56 EST 1998 | Roger W Pufky
| I am looking for equipment that can place and reflow c-tab devices. | These devices are 0.012" pitch. Universal used to make a machine for this purpose, but it has been discontinued. | If anyone has any info, please let me know. | Thanks, | Pierre
Electronics Forum | Thu Jan 15 09:08:54 EST 1998 | Roger W Pufky
| I am looking for equipment that can place and reflow c-tab devices. | These devices are 0.012" pitch. Universal used to make a machine for this purpose, but it has been discontinued. | If anyone has any info, please let me know. | Thanks, | Pierre
Electronics Forum | Sun Jan 20 14:04:49 EST 2002 | cstech
We have a CP6 5000, please kindly inform us the optimal tact time is 0.09 or 0.12. Kindly confirm us the CP65 is same or different to CP6-5000. The CP6-4000 and CP6-500, any different, except on the table size? Hope to recieve your help?!
Electronics Forum | Fri Dec 26 13:35:14 EST 2003 | fpcb
hi, When I start a MPA-80 ( NM 2529T ) I have a 4600 error, ( 1 block stop ) , I check the covers and the pressure : all ok. I monitor the head I/O address 012 and the relative bit 6 is responding when I open the covers. All seem ok BUT the error
winsouce.jpg)
