Electronics Forum | Mon May 10 14:06:24 EDT 2010 | jdengler
You have a resume posted 5/6/10 that's actually an advertisment. Jerry
Electronics Forum | Mon Feb 20 09:20:40 EST 2006 | teilo
We can supply soltec fingers for $6.10 other makes are available please feel free to contact office@teiloengineering.com We can also supply titanium retrofit kits for the conversion to lead free at a fraction of the manufacturers price.
Electronics Forum | Mon Oct 26 01:37:43 EST 1998 | Samson
I'm very new to the SMT process but I'm tasked to qualify a MPM Printer and a Panasert PnP m/c. The product consists of 6-10 different parts of a total of around 70. Please advice on the parameters for each m/c which I should focus on for optmization
Electronics Forum | Mon Oct 26 20:09:19 EST 1998 | Dave F
| I'm very new to the SMT process but I'm tasked to qualify a MPM Printer and a Panasert PnP m/c. The product consists of 6-10 different parts of a total of around 70. Please advice on the parameters for each m/c which I should focus on for optmizati
Electronics Forum | Mon Oct 26 20:54:10 EST 1998 | Jimmy strain
| I'm very new to the SMT process but I'm tasked to qualify a MPM Printer and a Panasert PnP m/c. The product consists of 6-10 different parts of a total of around 70. Please advice on the parameters for each m/c which I should focus on for optmizati
Electronics Forum | Sat Oct 04 00:07:46 EDT 2003 | Dean
" few software bugs"....many software bugs. May I remind you of version 6.10, 6.32 and the still-born 6.34!!! MPM has worked very hard to repair these, though it has taken some time. I have 5 machines from the SM Tech era, mpm500 and mpm1500 era (v
Electronics Forum | Tue Dec 19 16:26:24 EST 2006 | samir
Grant, Newer lead-free fluxes have 6%-10% solids content - more activator, therefore leave more "visible" residues. Old technology tin-lead fluxes got down to as low as around the 4%-6% range (I'm going off memory, so me might be wrong)... You'll
Electronics Forum | Thu Jun 02 22:40:13 EDT 2016 | slouis2014
Hi, yes have a few experiments initially i tried to increase the solder volume but component pin have insufficient solder. 1. The solder coverage do you calculate it by solder volume or solder area. 2. if i would achieve as you recommend 50-60 % woul
Electronics Forum | Wed Mar 14 17:52:49 EST 2001 | davef
6 Work Life Test 6.1 Obtain a stencil with 15 to 20 rows of a series of 0.025 by 0.050 inch apertures spaced 0.050, 0.040, 0.025, 0.015, 0.010, 0.010, 0.025, 0.040, 0.050 inches apart. See Appendix 1. Source of supply: Metal Etching Technology.
Electronics Forum | Tue Oct 27 15:25:02 EST 1998 | Stefan W.
Hi Samson ! In order to give you more detailed information I would like to know what your component range is and how many boards you supposed to do. Panasonic and MPM are a good choice, however, Panasonic has not many P&P machines on the U.S. market,
.gif)
