Electronics Forum | Sat Dec 17 15:46:28 EST 2005 | Csabee
Samsung SM320 don't have sensor for recognizing component. Only using Fly&Fix camera. In first time the korean samsung service engineer advised me (3,7light settings for chips and the machine generated many dumps, sometimes 50 or more per day. But n
Electronics Forum | Tue Apr 03 06:08:11 EDT 2012 | rpa
Hi, where can i place a manual tray feeder on OPAL XII - Assembleon. I tried to put the tray on rear side feeders positions and teached components array positions but an error occurred "software outlimits".
Electronics Forum | Fri Dec 16 15:23:04 EST 2005 | Csabee
I think the Samsung SM320 is quite good machine..But I suggest that must assembly feeder cover to the feeder trolleys, because without that the tape feeders are not safe for the heads. Feeders should broke the head. chip components wrong light sett
Electronics Forum | Wed Sep 04 09:47:41 EDT 2019 | smrsteve
Hello All, I've just bought a Quad 4c pick & place machine. It's so close to actually building boards, but just doesn't quite get there. I was wondering if there's somebody out there with experience of these machines that might be able to help...?
Electronics Forum | Fri Jul 26 20:20:06 EDT 2019 | kylehunter
This week we assembled around 30 panels of a LED board, totaling around 350 boards. In doing so we had to work around a really crazy issue. 1) A board goes in, all components are placed perfectly. 2) Next board goes in, all components are around 5m
Electronics Forum | Sat Dec 17 02:37:21 EST 2005 | manyhats
Hi, it seems like you have some experience with the SM320... How do you feel about the reliability, and consistency of it? does it generate alot of error on a run? and what do you mean about feeders breaking the head? Also you're telling me that this
Electronics Forum | Wed Dec 10 08:33:08 EST 2008 | lkpdsund
Hello! I have a problem with Assembly Expert 7.3.0. During optimization of the assembleon AX5 an error occurs; The program seems to have a problem connecting the machine library with the component library (device.lib). Even though I have defined th
Electronics Forum | Sat Jun 27 17:49:24 EDT 2020 | jmelson
I can't find much info on the older Essemtec machines. First, I'd want to see the "spec sheet", then I'd want to find out what the programming environment is like. (I was really impressed with the Samsung machines in that regard.) I have not seen
Electronics Forum | Thu Sep 19 16:58:45 EDT 2019 | kylehunter
So.. I thought I had fixed the issue, but it seems not. The issue that was causing the fiducials to not be found, I 100% have solved. The board was not reaching the stopper before being clamped, causing the board to be a few mm's offset. I added a de
Electronics Forum | Tue Apr 29 14:13:52 EDT 2003 | stefwitt
My opinion to hold on to your machines was based on the current market situation. First of all, I don�t believe that a customer with ten boards will go to China for prototype production. Truth is, that the remaining market here is the prototyping mar
.gif)
