Electronics Forum | Mon Mar 26 16:58:53 EDT 2018 | solderingpro
Is there anything stopping you from replacing the flat belt solution to a continuous running steel roller chain conveyor? - From there (depending upon board temperature) you should be able to buffer your boards in a vertical buffer station if neede
Electronics Forum | Tue Sep 22 13:55:27 EDT 2020 | makersan
no one uses it?
Electronics Forum | Wed Sep 23 17:14:14 EDT 2020 | assuredtech
Contact me at AssuredTechnicalServiceLLC@Gmail.com Ed
Electronics Forum | Sat Nov 03 10:57:27 EDT 2012 | davef
EricR: Regarding "*** By the way, since we have used the Tin-Silver-Copper lead free solder there has been a strange liquid type chemical leek from the oven exhausted pipes." ... I don't know anything about your process, but the first thing I'd inve
Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Tue Jun 30 10:33:59 EDT 2020 | makersan
Hello to everyone, If you have the user manual for ASYS LSB 03 and ASYS PS 30 models, can you share it?
Electronics Forum | Sat Jul 24 00:04:55 EDT 1999 | Scott McKee
| | | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not perform
Electronics Forum | Wed Aug 27 14:02:46 EDT 2008 | jeffharley
We use a power washer, blow dry, then lightly oil the links with mineral oil. Works great
Electronics Forum | Thu Dec 03 15:41:09 EST 2015 | proceng1
We do run them through an Aqueous washer, but I don't see excessive deposits or anything before washing. And our wash is just heated DI water.
Electronics Forum | Fri Jul 13 09:43:16 EDT 2007 | lococost
wow, never heard of such a thing! Are you sure it's allways different types of material? Are you using a washer that isnt cleaned regular? I would check your product step by step, from bare PCB to finished product to find out where exactly in your
