Electronics Forum | Mon May 03 17:48:54 EDT 2010 | jrr3434
I need to wash a bach of boards (25) using di water. I plan on washing them by hand. What would be the best way to go about drying them?
Electronics Forum | Tue May 04 08:14:33 EDT 2010 | rgduval
Rinse them clean. Blow them out with some shop air. And let them dry in an oven for awhile.
Electronics Forum | Wed May 05 12:00:35 EDT 2010 | jrr3434
Thanks for the info! What's a good type of oven for baking boards in?
Electronics Forum | Tue May 04 09:45:05 EDT 2010 | dyoungquist
Only use the shop air if it is clean and dry. I know from experience that one can get water and a little oil from the compressor in the air lines. We are in a drier climate with humidity levels in the 25%-35% range on average. All we do is let the
Electronics Forum | Wed May 05 09:00:53 EDT 2010 | davef
IPC-A-610D Sections 3.1, 3.2, and 3.3 and Table 3.1 specifically mention compressed air as a source of ESD damage
Electronics Forum | Wed May 05 13:47:00 EDT 2010 | davef
For sources of baking ovens, look here: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=56260
Electronics Forum | Mon May 24 19:24:35 EDT 2010 | jry74
We bake all of our boards at 220 degrees F for two hours. This bakes out all the moisture. Blow off the parts prior to placing in the oven.
Electronics Forum | Tue May 04 12:43:55 EDT 2010 | rgduval
Good point on the shop air. Shop air can also generate a tremendous amount of ESD. There are special nozzles you can get to minimize it. We use our shop air mostly for blowing out connectors, and larger components that have a history of trapping w
Electronics Forum | Wed Jul 31 11:31:54 EDT 2013 | pbarton
Could it be that the IPA you are using in the solvent/DI mix is not anhydrous, or in some other way not the correct purity? If it is not correct you will not be able to calibrate. Best rgds, Peter B.
Electronics Forum | Tue Mar 30 13:40:30 EST 1999 | dennis warner
We've been using a newly installed DI re-circulating system. It's been a big headache. Mostly understanding what causes our resistivity to be unpredictable. I think I've got a handle on that part now. The system consists of a Carbon,HMR(chealet),Cati