Electronics Forum | Thu Feb 05 14:30:29 EST 2015 | chsravan
Can I apply IPC-610 class 3 workmanship standards to an assembly made with a IPC-600 class 2 PCB?
Electronics Forum | Fri Feb 06 18:32:59 EST 2015 | chsravan
Hi Scott,Thank you for the response. I was also thinking the same that the assembly will no longer be Class III. Thanks again.
Electronics Forum | Fri Feb 06 11:11:04 EST 2015 | mascott123
I have asked that same question to a co-chair of the J-STD-001 committee who in turn checked with personnel at IPC. The answer I received is that yes you can apply the Class 3 assembly requirements using a class 2 PWB but the resultant assembly will
Electronics Forum | Fri Aug 19 07:40:24 EDT 2011 | scottp
What do the heel fillets look like and what level of IPC-610 (class 1,2, or 3) are you working to? Do the joints on all 4 sides look bad or just the one side? Do other parts on the board look OK?
Electronics Forum | Fri Dec 07 09:43:04 EST 2001 | Russ Steiner
I have a mixed technology PCB that has SMT all on bottom, TH parts on both sides (Yes, I realize that's bad. Can't be avoided.) We have designed a 10-up panel, 2 x 5 array. There are 50 leads per bd, 500 per panel. How much time is reasonable to a
Electronics Forum | Thu Aug 07 22:51:05 EDT 2008 | davef
We expect aerospace to be IPC-A-610, Class 3 and J-STD-001, Class 3. The above quality statement stecifies: * "IPC 610, Class 2 acceptability." This is unclear. Should this be "IPC-A-610, Class 2 acceptability?" * No class for J-STD-001. Should we a
Electronics Forum | Tue Oct 15 11:16:30 EDT 2019 | charliedci
We have been using Cree 3 color LED's (CLV6A-FKB) in many products for several years (pic attached). At the rate of 3 to 5% of the units assembled with this LED, the Red LED fails. After touch up with soldering iron it functions. This happens to the
Electronics Forum | Thu Aug 07 14:08:30 EDT 2008 | arminski
Can A Company or Electronic Manufacturing Company go for AS9100 certification if the Quality Policy states that we only meet IPC Class 2 Standard? I'm just very confused for I know AS9100 is an Aerospace Quality System and must meet IPC Class 3. thi
Electronics Forum | Fri May 11 09:17:12 EDT 2018 | charliedci
I have used a 2006 Electrovert Vectra ES (63/37) for last 3 years, we acquired it used. It had little or no maintenance before we got it, now after replacing a solder pump motor, preheater fans and thermocouples it is pretty reliable. The spray fluxe
Electronics Forum | Mon Apr 17 18:29:03 EDT 2006 | lit
There is learning on all brands requiring fine tuning the test parameters. The first point is not to allow defects to escape. Many brands can do a good job with preventing escapes. The struggle with all the brands becomes false calls. The companies r