Electronics Forum | Wed Jan 06 02:37:46 EST 2021 | ttheis
Don't know if this is relevant but I just came across this bulletin in the UIC docs: Document # TECH-0155 Software level:All Machine block:All Machine type(s):GSM1 Platform,GSM2 Platform,GSMx Platform,GSMxs Platform Target Users:Level 2 Topic:Part
Electronics Forum | Fri Mar 26 23:07:07 EDT 2010 | dekhead
Just a guess: Are you printing your fiducials on the fiducial side of the board? Fidicial Side is for Vision Calibration, Bare Copper Side is for Offset Calibration (Step 5 of procedure says "copper side uppermost"). After printing 25 fiducials o
Electronics Forum | Mon Mar 06 13:45:51 EST 2000 | JAN
Thanks to all who responded. Your help were very important.In fact, we had a problem with the lighting calibration.
Electronics Forum | Mon Mar 06 13:45:51 EST 2000 | JAN
Thanks to all who responded. Your help were very important.In fact, we had a problem with the lighting calibration.
Electronics Forum | Mon Dec 14 06:26:16 EST 2015 | fredmoulin
Hi guys, I got a problem with our DEK 265 GSX : This message appears : 1300044 - Failed to perform Lighting calibration. Please, what does it mean, and how can I solve it ? Thanks very much.
Electronics Forum | Wed Feb 23 11:12:47 EST 2000 | TMV
This note is in response to your question about not being able to recognize a component that is running on a 4796 but has problems on a 4791. The 4791 and 4796 used two different recognition systems and the lighting calibration will be not be the s
Electronics Forum | Wed Feb 23 11:12:47 EST 2000 | TMV
This note is in response to your question about not being able to recognize a component that is running on a 4796 but has problems on a 4791. The 4791 and 4796 used two different recognition systems and the lighting calibration will be not be the s
Electronics Forum | Fri Feb 18 01:15:27 EST 2000 | sin
Jan, have you try to teach on hsp4791 see if it's ok. Normally, what would happen is the lighting. Do you know how to calibrate the lighting on HSP?
Electronics Forum | Fri Feb 18 01:15:27 EST 2000 | sin
Jan, have you try to teach on hsp4791 see if it's ok. Normally, what would happen is the lighting. Do you know how to calibrate the lighting on HSP?
Electronics Forum | Fri Aug 25 23:54:26 EDT 2006 | mika
If You adjust the focus to perfection, You still need the UIC GSM calibration kit, so that the machine will know where the spindles are according to the cameras (OTHC, P2P:s, fiducial camera), X-Y-Theta-spindles, nozzle changer, feederbanks and mach
.gif)