Electronics Forum | Wed Sep 26 14:18:50 EDT 2012 | tank
Wondering how good the software is for the Quad QSA 30 is. Is it a pain to program? We have panels with 100 boards... 1500 parts, I hope you don't have to manually teach the whole panelized board. Any other info you can provide is welcome. We
Electronics Forum | Wed Sep 26 15:04:09 EDT 2012 | kahrpr
The QSA30 is basically a Samsung CP40 with a few changes. For an older machine the programming is pretty good. it can do array boards and has an import feature for XY data. Tts been about 7 years since I ran one. Its a pretty solid machine.
Electronics Forum | Thu Sep 27 05:47:21 EDT 2012 | bobpan
Check the software version before you buy it. If it is not version 6.75 do not buy it. This is the last version released for this machine and fixes many bugs that made running a panelized board a nightmare. 0603 parts and above is where i would stay
Electronics Forum | Mon Jul 09 18:54:34 EDT 2012 | kahrpr
Make sure the board size is big enough. the placement can not be outside of the board size.
Electronics Forum | Sat Oct 22 14:42:28 EDT 2005 | bobpan
we had a special nozzle made and used the new quad 0402 feeder and the machine didnt miss a part.....but its probably best only to use 1 head to pick the parts because of the z being not 'perfect' between heads and thats where you would have problems
Electronics Forum | Sat Aug 22 16:53:32 EDT 2020 | jmelson
I'm trying to diagnose a Quad QSA-30A machine that won't go ready. I have the machine technical drawings, they have overall machine schematics and cable wiring on most of the cables, but that's all. Does anyone have access to the schematics of the
Electronics Forum | Wed Aug 26 07:24:29 EDT 2020 | sarason
Have you tried this solution https://www.ebay.co.uk/itm/SAMSUNG-CP30-VME-10-DPRAM-REV-001-03-I-O-BOARD/173217871888 sarason
Electronics Forum | Wed Aug 26 15:00:08 EDT 2020 | jmelson
That's a rev 1 board, my machine has a rev 2. I have no idea if they are interchangeable. So, I bought a Rev 2 board from Korea. But, I'm flying pretty blind on this. I have traced the ready button signal to a microprocessor pin on the IO_DPRAM bo
Electronics Forum | Tue May 31 15:03:31 EDT 2011 | gosswald
The complete model number is QSA-30. Thanks
Electronics Forum | Thu Jul 16 15:22:21 EDT 2020 | jmelson
Can anybody give me some general info on the QSA-30? Is the management computer built into the machine, like on Samsung CP machines, or just a separate computer? If separate, how does the management computer communicate with the motion computer? (H
