Electronics Forum | Tue Mar 29 14:45:12 EST 2005 | davef
IPC-TM-650 TEST METHODS MANUAL Number 2.4.21.1 Subject: Bond Strength, Surface Mount Lands Perpendicular Pull Method 1 Scope This test method is used to determine the bond strength (breakaway strength) of surface mount lands from substrate materials
Electronics Forum | Mon Apr 04 17:32:07 EDT 2005 | toromaster
we also have a need to measure the solder bond strength of our gull wing parts on our pwb. there are many published comparisons between eutectic SnPb and no Pb solders out there. the number that comes to mind is about 10N to 15N. I have not looked
Electronics Forum | Fri Mar 30 18:24:12 EST 2001 | davef
There is no test. Beyond the issues that you mentioned that affect shear, an article published in a recent [1/01] "Journal Of Surface Mount Technology" documents that shear is also dependent on the rate of shear. You may be able to contact the auth
Electronics Forum | Thu Jan 14 22:52:28 EST 1999 | Wayne
I am experiencing a problem with a surface mount coax connector that over time pulls loose from the PWB. The connector has 4 small gold plated leads and we are soldering it to a flash gold board. A cable plugs into the connector and puts some const
Electronics Forum | Wed Apr 08 12:29:08 EDT 1998 | Justin Medernach
| Is it just me, or does anybody else have problems with open connections on small surface mount headers and connectors? I am talking about small 20 to 40 pin devices, 25 to 50 mil pitch. We put these things on the board, the feet look like they ar
Electronics Forum | Tue Apr 14 15:50:45 EDT 1998 | Bob Barr
Justin, Thanks for the response to my dilemma. For once it's not just me! The parts seem perfectly solderable, but I will try the modification to the profile you suggested. I wonder if the retention clips may be letting loose from the holes they a
Electronics Forum | Mon Mar 30 12:46:14 EST 1998 | Justin Medernach
| Can someyone tell me where i can find some informations, | about optimal design of footpad for pasta dispensing. John, Check out IPC-SM-782. This refers to surface mount pad design for surface mounted components. The spec is available for purcha
Electronics Forum | Tue Mar 31 12:54:53 EST 1998 | Justin Medernach
| | Can someyone tell me where i can find some informations, | | about optimal design of footpad for pasta dispensing. | John, | Check out IPC-SM-782. This refers to surface mount pad design for surface mounted components. The spec is available fo
Electronics Forum | Thu Jan 14 23:38:34 EST 1999 | Chris G.
| I am experiencing a problem with a surface mount coax connector that over time pulls loose from the PWB. The connector has 4 small gold plated leads and we are soldering it to a flash gold board. A cable plugs into the connector and puts some con
Electronics Forum | Fri Jan 15 11:40:37 EST 1999 | Bob Willis
| | I am experiencing a problem with a surface mount coax connector that over time pulls loose from the PWB. The connector has 4 small gold plated leads and we are soldering it to a flash gold board. A cable plugs into the connector and puts some c
The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.
Training Provider / Events Organizer / Association / Non-Profit
6600 City W Pkwy
Eden Prairie, MN USA
Phone: 952-920-7682
.gif)
winsouce.jpg)