Electronics Forum | Tue Apr 16 14:42:20 EDT 2002 | stefwitt
I think this licensing thing was a poor decision to begin with. I can understand the reasoning for GenRad to issue a software license, to protect their product against cloning. Why Universal followed could have been caused by the take over and the
Electronics Forum | Thu Sep 10 15:29:15 EDT 1998 | matthew park
Tim, What is it? Which ones are you talking about: 0.080" vs 0.008", 0.100" vs 0.010", or 0.050" vs 0.005" pitch devices . If you are saying 0.080",0.100" and 0.050", any pick and place machine can handle that. Well if not, one machine that is ca
Electronics Forum | Tue Jun 28 12:04:07 EDT 2011 | esoderberg
I would agree up until 2005 - 2006. Universal did not have a good SMT solution. Their GSM's were limited and combined with the sanyo chip shooter - software was a nightmare. What years did you have universal?
Electronics Forum | Wed Jun 16 16:54:13 EDT 2004 | Vince Cook
Greg, Just to cover the formalities, I work for Universal, and specifically with the GSM Platform. The GSM with a 4 spindle head can place 0201s, however, there are a number of things you'll want to have, chief among them a 1 mil/pixel upward lo
Electronics Forum | Thu Aug 10 13:26:02 EDT 2017 | dleeper
In my past life, I worked at a CM that used Mirae "Meridian" machines Universal Instruments "Genesis" machines. The universal instruments machines were much, much faster. What sort of head configuration did your Advantis machines have? The 30 spindl
Electronics Forum | Mon Jan 29 15:21:56 EST 2007 | flipit
If you teach your feeders, you can no longer gang pick correct? I have never had a dual beam or dual head GSM before. However, if you teach feeders with the fiducial camera and your picks are still off, there is an offset in one or several spindles
Electronics Forum | Tue Jul 07 03:45:18 EDT 1998 | Martin Kelly
Hi everyone, I'm an apprentice with Jabil Circuit in Scotland, And recently i have been given a project to do on the Universal GSM. Any help on this SMT machine would be much appreciated. Things that i'm looking in to are, What size of compo
Electronics Forum | Tue Jul 07 12:10:52 EDT 1998 | Dave F
| Hi everyone, | I'm an apprentice with Jabil Circuit in Scotland, And recently i have been given a project to do on the Universal GSM. | Any help on this SMT machine would be much appreciated. | Things that i'm looking in to are, What size
Electronics Forum | Fri Sep 23 08:27:28 EDT 2005 | siverts
The 7 spindle Flex jet head, can only pick max 7 comps. from the GSM base machine in a single operation, not from the shuttle. The Flex jet head is faster in z-axis and will also use the OTHC (On The Head Camera) to inspect most of Your smaller comps
Electronics Forum | Mon Jan 19 09:07:45 EST 2015 | cotinc01
We can offer several nozzles to assist with the placement of 0402/0201 components in the four-spindle head. We offer the 06MPF along with custom ceramic tipped nozzles. Most of our standard nozzles for this head type are less than $125.00 each. Chec
.gif)
.gif)
