Electronics Forum | Mon May 25 21:27:07 EDT 2009 | paligora
Our machine is YAMAHA YVL88II and the issues we have with these data switches are either not being picked up from the feeder at all or are being ped before assembly.
Electronics Forum | Tue Nov 08 01:46:43 EST 2016 | sarason
Some machines use air blowing to not only place the part but to also help guarantee that when the nozzle is sucking it doesn't end up with a net accumulation of solder paste inside the nozzle. Juki and Yamaha spring to mind. sarason
Electronics Forum | Fri Apr 06 02:17:15 EDT 2018 | rob
@ Sr.Tech, Most of our Chinese spares are Juki & Yamaha original & still bagged, just much cheaper. They wouldn't sell machines in China if all the spares and consumables were at European mark ups. Nozzle wise the Juki 750 & 760 copies are not 100%
Electronics Forum | Mon Jun 29 20:59:37 EDT 2020 | kumarb
Hi. The PCB does not look to be heavy. Suggest you try to email their staff - they are very good. Personally have worked with Scott there and he knows the VIOS software very well. https://trans-tec-america.com/contact/ We have the Assembleon Eme
Electronics Forum | Mon Oct 24 11:04:58 EDT 2022 | richardcargill
The yamaha feeders need leader tape to function - so if you're using cut reel components you'll lose 3 or 4 just on set up alone. Run-time attrition is harder to help with as machine setup and calibration, condition of nozzles/feeders, ability of ope
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
Electronics Forum | Thu Aug 31 14:15:34 EDT 2023 | compit
Hello What feeder do you use for the long connector (65-80mm) - tape feeder, tray? What nozzles? We want to mount a SODIMM200 socket. I don't know whether to look on the tape or on the trays... The MG1 spec says it will mount connectors up to 100mm (
Electronics Forum | Mon Mar 26 02:41:01 EDT 2018 | robl
Hi Reckless, If it is an Opal Xii with the 8 nozzle conversion it is a no brainer. If it's only got 4 nozzles, then it still has the advantage of being able to place down to 01005 (the 7 series is only 0402), and should be able to handle a wider r
Electronics Forum | Tue Jun 07 00:21:42 EDT 2011 | jacki
Hi All Currently, we encountered that the schottky barrier diode was up side down or misalignment during SMT process.And, many parts were blown away as pick up error. What we found is its package space is a little bigger for parts to move. I seek y
Electronics Forum | Tue May 18 09:58:17 EDT 2021 | kumarb
Thank you so much for the advice. We were suspecting blockage but know that we have clean nozzles. Did the air blow out and removed a spot of black matter - perhaps what was an old o-ring? Nozzles are 61 and 62 posing the issue. Our tech said that 64