Heller Industries Inc. | https://hellerindustries.com/heller/vacuum-profile-reflow/
. Higher vacuum levels tend to produce lower void rates but are associated with longer vacuum cycle times. Longer dwell times can also help with reducing void rates
Heller 公司 | http://hellerindustries.com.cn/00600-248.pdf
. No. 1 — A Standard Profile? Figure 1 on page 110 includes the “ideal” reflow profile. It is characterized by a 2° to 4°C/sec ramp to a dwell zone of 30 to 90 sec at approximately 150
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/00600-248.pdf
? Figure 1 on page 110 includes the “ideal” reflow profile. It is characterized by a 2° to 4°C/sec ramp to a dwell zone of 30 to 90 sec at approximately 150
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/04/00600-248-1.pdf
? Figure 1 on page 110 includes the “ideal” reflow profile. It is characterized by a 2° to 4°C/sec ramp to a dwell zone of 30 to 90 sec at approximately 150
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/industrial-coating-systems/products/can-manufacturing-induction-dryers-and-heaters/isc2-pre-cure-oven
° internal spray for improved coverage in the seam area Provides longer dwell time at cure temperature with existing oven to improve cure Instant start/stop control saves energy and prevents
GPD Global | https://www.gpd-global.com/co_website/pdf/pump/NCM5000-Jetting-Pump.pdf
. Pump Operation Pressure - controls the force of fluid exiting the pump Pump Open Time - adjusts fluid volume of a single shot Reservoir Pressure - controls reservoir fill speed Pump Dispense Dwell
| https://www.eptac.com/soldertips/rechecking-thermal-profiles/
. To verify the board is getting the correct amount of heat to prepare and dry out the solder paste and reflow the solder paste for a long enough dwell time to solder all the components, the thermal
GPD Global | https://www.gpd-global.com/pdf/pump/NCM5000-Jetting-Pump.pdf
. Pump Operation Pressure - controls the force of fluid exiting the pump Pump Open Time - adjusts fluid volume of a single shot Reservoir Pressure - controls reservoir fill speed Pump Dispense Dwell