Electronics Forum | Mon Mar 09 08:31:32 EDT 2020 | jactomas
Solved!! Finally it was the CPU board, I changed this and has started running perfectly. It is my opinion that the problem coming from GPU of this board, but I will never know this. by the way, I have receive a incredible support from Julio from PFI
Electronics Forum | Wed Mar 04 13:45:01 EST 2020 | tomdegas
I appreciate the help. The Hydra travel is fine and goes down and back up with no trouble. I swapped the Z Mot board with the Y Mot board with no change. The long ribbon cables were changed about a month ago but I will inspect them again to be sure.
Electronics Forum | Thu Mar 05 07:40:55 EST 2020 | tomdegas
I swapped the mi boards with ones from a working My12 machine and the same results. To recap my problem: On "Hardware Initialization" the center jaws open and close, the Hydra Theta belt moves back and forth, the Hydra head moves all the way down an
Electronics Forum | Tue Feb 25 03:10:12 EST 2020 | tamasmagyar
Hi Tristan, *Missing .mac files or cli folder* - I suppose you copied the program from one version/index to another. If you to that, you have to rename not only the program folder and the files in it, but also you have to modify the paths in program
Electronics Forum | Tue Feb 25 03:32:58 EST 2020 | bukas
hello guys, I got a problem with MAIN START switch on Samsung CP45FV NEO. The switch itself works, and it activates contactors #1-1 #1-2 and #3 but after pressing READY button there is en error msg reporting that MAIN START has not been pressed. Alre
Electronics Forum | Tue Feb 25 11:03:51 EST 2020 | joeljacobo
Hello everybody, you see, I have a problem with the placement of these RFI SHIELD CLIPs (PN: S0941-46R) I simply cannot place them using the machine, so far I have placed them by hand in the prototypes but I am about to start production and I need
Electronics Forum | Tue Feb 25 20:59:40 EST 2020 | luciano_zhang
we want to find the replacement of this part B57860S 7003 series https://p03.ickimg.com/datasheet/9f/08/6ec5/9f/2d97d88d13f7a49395fa5c693f14f05f.pdf does any one know if it have alternative ones?
Electronics Forum | Fri Feb 28 14:53:08 EST 2020 | rlising
Hi, I purchase a leadfree aven solder pot 300w. We are wanting to pre tin power and ground wires prior to soldering onto pcb. I have some anti-erosion flux cored wire solder from koki S03x7Ca-70m 1.6mm. Can this solder be used? If not what is t
Electronics Forum | Mon Mar 02 11:15:23 EST 2020 | slthomas
You'll want to chop your solder into "bite sized" pieces for your pot, by the way. A bolt cutter or a band saw are a couple of ways to do it without ruining other precision tools. It's up to you for the alloy you use, but there are several (some
Electronics Forum | Wed Mar 04 10:05:13 EST 2020 | dontfeedphils
In a past life I used a Swam Blaster from Crystal Mark with the media from them as well. I used it on Humiseal 1A31 and 1B31 (I think those were the products, it's been a little while). This machine and material were awesome IMO. Made CC removal a
