Electronics Forum | Sat Dec 14 02:29:52 EST 2013 | padawanlinuxero
Hello I hope this helps For a component with axial leaded - vertical The clearance of the component body or weld bead above the land is 1.00mm (0.039in) Component body must be perpendicular to the board The overall height does not exceed maxim
Electronics Forum | Mon Mar 30 16:02:44 EST 1998 | Michael Allen
| We have successfully put .016" vias in .030" pads. | There is no issue with .030" solder balls, since | the actual volume of the .002" via in pad is small | compared to the ball+solder paste volume. | We did notice random bubbles where, apparentl
Electronics Forum | Thu Mar 24 07:06:06 EST 2005 | davef
There's a lot of comparison tables on the web. Here's one: Properties - Summary [A Winlow Circatex] Attribute||Hasl||Immersion Silver||Immersion Tin||Electroless Pd||OSP||Eless Ni / Imm Au Shelf Life (months)||12||12||12||12||12||6 Multiple Reflows
Electronics Forum | Thu Aug 03 12:51:20 EDT 2006 | Ofer Cohen
I'd appreciate your support in the following issue: A significant batch of PCBs failed on de-lamination. The failure was identified, of course, only after the assembly. There is a big variety of components (BGA 1mm, BGA 0.8 mm, FQPs and other SMT co
Electronics Forum | Thu Aug 03 12:51:59 EDT 2006 | Ofer Cohen
I'd appreciate advise in the following issue: A significant batch of PCBs failed on de-lamination. The failure was identified, of course, only after the assembly. There is a big variety of components (BGA 1mm, BGA 0.8 mm, FQPs and other SMT componen
Electronics Forum | Sun Feb 13 19:04:13 EST 2000 | Jackie Hsieh
First I'm a Taiwanese people so excuse my bad english writing. On my experience, The process of double side SMT procedure with two methods ---First one is appling the glue on the solder side, and placeing the R,C,L chips components on it.and 2nd one
Electronics Forum | Fri Dec 10 17:08:51 EST 1999 | John Thorup
Tell those leads not to be drinking so much. Anyway... too bent to work in a sequencer or auto insertion machine is a lot less bent than if you're trying to manually stick it into a hole. As far as where the lead exit/enters the body of the compone
Electronics Forum | Sat Jan 23 09:36:35 EST 1999 | Parvez Patel
Hi Everyone, We plan to build, for reliability/experimental/research purpose some CSPs (namely Tessera microBGA 46-I/O 0/75mm pitch and TI 64 I/O 0/8 mm pitch). the various factors that we plan to evaluate are the reliability and assembly concerns fo
Electronics Forum | Fri Oct 16 21:07:31 EDT 1998 | Scott McKee
| I need the following information on uBGA's - body size, ball pitch and ball diameter. Are they a plastic package (with the resulting moisture sensitivity of a PBGA)? Also, does the uBGA put any special requirements on pick and place equipment? |
Electronics Forum | Tue Jun 04 17:10:13 EDT 2002 | davef
First, �flash gold� is very loose language. It means different things to different people. �Flash� gold is a thin coat of immersion gold. Imm gold self-limits at ~0.3um[12uin]. And fabs put-down �flash� prior to electroplating thicker gold for wi
