Electronics Forum | Mon Feb 10 17:04:35 EST 2014 | globalpowerproducts
I am having a problem producing clean boards when i run them through my new machine. Currently i use an Electrovert system that uses trays and we are trying to upgrade our equipment so I bought a SHEO 8250 and it is making the boards dirty and lots o
Electronics Forum | Thu Feb 20 14:02:31 EST 2014 | rgduval
I'm in the market for some new (to me) pick and place equipment, and, could use some opinions. I'm a MyData guy by experience, and have recently been working on some older Philips machines. I'm comfortable on a MyData platform due to experience,
Electronics Forum | Wed Mar 05 10:02:47 EST 2014 | dyoungquist
Per the TPSys Version 2.4 Software Manual: Force sensor level not within limits. * Force sensor dirty (inside Z tool holder) * Bad force sensor connection Try this: Remove the tool from the Z Midas head. Take a cotton tipped applicator (Q tip) and
Electronics Forum | Thu Apr 10 15:27:26 EDT 2014 | superlen
I thought I'd clarify "Optimized" a little more as well. The Optimize function on the machine as well as in EasyOLP (if I remember EasyOLP clearly) will calculate the optimum order of the feeders and placements on the machine based upon the types o
Electronics Forum | Mon Apr 28 10:08:43 EDT 2014 | markhoch
Ok Machine Manufacturers... this goes out to you. When your Customer (me) spends $150K on a machine. And you show up at the facility to install this machine. Please bring the tools you are going to need to do the basic installation. Asking me to borr
Electronics Forum | Mon May 05 10:25:31 EDT 2014 | markhoch
I think what angered me the most was finding out that the FSE was going to need transportation to and from the plant every day. And I was more angered towards the Manufacturer's Sales Rep because my interpretation, though I may be wrong, was that the
Electronics Forum | Sat May 17 10:38:49 EDT 2014 | sarason
I hate to say this but in all probability this wont work. I have built real strain gages and they depend on the change(Co-effiecent) of resistence with strain(or Stretch). since you are connecting you elements up with copper wire it will frm part of
Electronics Forum | Thu Jul 10 13:24:59 EDT 2014 | sargeredarmy01
Ok so here is where I am with everything. I pulled the cylinder and cleaned it out. Didn't find anything out of the ordinary inside. I set everything back up and tested it. Still nothing. I went into the I/O map and tracked down that input, I then
Electronics Forum | Wed Jun 18 18:58:10 EDT 2014 | ke6zoy
Hi All, We leadform components for our assemblies in house and have been tinning the leads using a dip methood by hand into a solder pot. by just handling the components during the tinning and cleaning process we are at times damaging the parts/lea
Electronics Forum | Fri Jul 25 10:11:36 EDT 2014 | cgreiner
We also had this problem and found similar results with the anti-backlash nuts binding. We went through the process of cleaning the lead screws and the nuts which resolved the problem for about 6 months only to have it return. We learned that the