Electronics Forum | Wed Jul 27 22:43:10 EDT 2005 | crishan
Hi all, Having a major problem with an IC being placed upside down. We pick up the fault at AOI. We have check several reels and the component is not placed upside down by the supplier. Where should I start looking; 1. Are we using an incorrect fee
Electronics Forum | Thu Aug 04 03:56:38 EDT 2005 | Rob
Hi Danny, I do remember you recently suggested to a customer who was new to surface mount & wanted low volume the following equipment that you were selling: 1. MPM AP25 2. CP4 3. IP2 http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CF
Electronics Forum | Thu Aug 11 08:56:20 EDT 2005 | pjc
Some causes of lack of top side fillets (hole fill) are: 1. Not enough pre-heat (a top side preheat will help, if no-clean flux, be sure to follow flux mfrs specification for top side board temp just before hitting wave) 2. Not enough flux 3. Flux i
Electronics Forum | Sun Aug 28 22:19:34 EDT 2005 | sonata06
Origin: China Price: To Talk About Specification: 1)Thickness Of Silver Plating:From 2Um-15Um 2)Material:ABS or PBT 3)Cu-Ni-Silver 4)Earth Module,Profile Module,Profile Switching Module,Disconnection Module,Connection Module 5)Different Colors are
Electronics Forum | Tue Sep 20 02:39:43 EDT 2005 | Lasse H.
Hallo again Base... Thanks for your answer... I've been following up, but with no luck... I've been on http://www.assembleon.com and been trying the Cad2Cad Express but I haven't got any luck in converting the dxf, or dwg files to some useable txt f
Electronics Forum | Wed Sep 21 16:23:36 EDT 2005 | 14367
I was going to ask the same question. As was mentioned, it depends on the classification of product. If it's IPC Class 3, with a requirement for high reliability, I'd want the OEM manufacturer to have a defined statement on this issue for more that
Electronics Forum | Thu Sep 22 06:54:14 EDT 2005 | Rob
Hi Gavin, Depends on what MSD class, but in general for the more sensitive parts if they've been opened & not used within the time limit it's rebake, add dessicant & seal. Our distribution side splits them down into more manageable/production size
Electronics Forum | Fri Sep 23 04:24:39 EDT 2005 | siverts
2.6 mil/pixel and a 4 mil/pixel cameras works maybe even better. It is sometimes a little bit difficult for the 1 mil/pixel cameras to accept parts; and it will take longer time to inspect a bigger QFP as it needs to take more pictures. We use 2.6 mi
Electronics Forum | Mon Sep 26 18:46:37 EDT 2005 | stano
Hello. We have problem with MPA-V. Problem is with V1, V2 axis. Error is V1 AXIS MOVEMENT IMPOSSIBLE and V2 AXIS MOVEMENT IMPOSSIBLE. On the driver for this axis lighting error LED ST (sensor touble). It is problem in connection between motor encoder
Electronics Forum | Thu Sep 29 03:40:43 EDT 2005 | aj
I have over 6 years experience working on Dek Printers, and I would highly recommend them to anyone BUT I have never seen the 2D Inspection last any longer than a couple of weeks running on the machine. This is the one side of things that they FAIL.
winsouce.jpg)
