Electronics Forum | Mon Sep 10 02:47:27 EDT 2001 | Peter W.
Thank you for your annotaions. I am aware of the limits and temperatures of that material, but we are doing some research with thermoplastic base materials which won't survive standard solder paste reflow soldering. And beside of using conductive ad
Electronics Forum | Mon Sep 10 13:44:43 EDT 2001 | Hussman
Hello All! I've been asked to change a current design using a shield. Currently we build it by using silver epoxy adhesive to make electrical connection. Just wondering if anyone out there has a experience with using surface mount clips that hold
Electronics Forum | Fri Oct 19 09:06:00 EDT 2001 | LW
I was somewhat involved with Kermit Aguayo during his work on the SMA-void problem, as I was with one of the SMA suppliers at the time. I recall the problem being related mainly to absorption of moisture by the uncured adhesive. Some SMA formulatio
Electronics Forum | Tue Oct 30 14:39:41 EST 2001 | markhoch
Has anybody else out there had problems with SMT connectors with plastic locating pins lifting up during the reflow process? We've had several instances with several differant types of SMT connectors lifting up during the reflow process. We've even g
Electronics Forum | Fri Nov 09 16:58:30 EST 2001 | davef
Go for it!!! You were unspecific, but adding mask to a completed board could cause: * Increased paste thickness, if you have double thickness of solder mask. * Wrinkled and lifted solder mask under the component, if the solderability protection of
Electronics Forum | Thu Nov 22 10:02:42 EST 2001 | Adam
Guys Has anybody had experiences with plastic glue stencils good or bad ? I also have a couple of questions : 1. Can I use the same aperture design rules for plastic stencils as I do on my metal glue stencils ? 2. How repeatable is a plastic glue st
Electronics Forum | Mon Dec 17 07:34:07 EST 2001 | Adam
Dear Colleagues Does anyone know or care to share any information as to typical torque values ( N/cm ) for components that have been placed using screen printing surface mount adhesive, using a plastic stencil ? Are there any industry set shear test
Electronics Forum | Thu May 30 11:12:38 EDT 2002 | robbied
If I get you right and you are looking for a micro stencil for bga rework, then you should try http://www.circuittechctr.com. They are offering a free sample of their Flextac micro stencils in a wide range of sizes. The thing with these ones is that
Electronics Forum | Wed Jul 24 07:18:12 EDT 2002 | lloyd
Hi, We occasionaly have problems with some of our panellised boards breaking away from each other. The section joining them is very small and makes the assembly weak. The boards are normally broken off during our through hole process (bad handling)
Electronics Forum | Thu Oct 24 15:45:10 EDT 2002 | seand
Hello TEC, This may be a good question for the Apps Engineers at your dispenser manufacturer. By providing the identity of the epoxy and the components you are placing, they should be able to make some recommendations for getting the proper dispens