Electronics Forum | Wed Jun 27 08:05:44 EDT 2012 | hank_greene
Hey I found out one website earlier named http://www.pcbprice.com/compare/europe PCB price comparison service It shows us nice price comparision table with list of all supplier and theire prices you can also write reviews there..for the corresponding
Electronics Forum | Mon Jul 02 16:35:33 EDT 2012 | stentech
There are a few different ways depending on the vendor. If they have the board and overlay it once it is cut. Make adjustments if necessary. If it is a double sided board do you see any movement after the first reflow? This should also be taken into
Electronics Forum | Fri Jul 06 10:35:32 EDT 2012 | ashworth14
All i used to do was blow them with an airline to remove the excess moisture then bake them for 15/20 min at 100' in an oven and that seems to work fine, i did get the info from a 4 stage cleaning guide for the actual cleaning solution we used but it
Electronics Forum | Thu Aug 16 09:55:53 EDT 2012 | sarason
You can try my package PCB Synergy. http://members.iinet.net.au/~sarason/ It can panelise many of the data formats it supports, but not all of them. If you mean panelise the PCB for manufacturing the board, then there are literally heaps of gerber
Electronics Forum | Wed Aug 15 11:07:12 EDT 2012 | dwelch123
those can be tricky. Try adjusting the start,stop nuts on the top of the pump. It may not be traveling far enough. Chipbonder your using should be fine and as long as your sure EVERYTHING is clean, using ream wire and solution syringe is being run th
Electronics Forum | Mon Aug 20 16:33:09 EDT 2012 | cobham1
We check the resistors to value check them. We are using resistors that are not marked in any way shape or form. We also hand build everything so it is very possible to have our operators place the wrong part in the wrong spot. From a time point of v
Electronics Forum | Tue Aug 21 06:26:26 EDT 2012 | headlad
I've had a CM202DHU since new (10 years) and it is a very reliable piece of kit. I wouldn't be happy placing 0201's but if you use 110 nozzles it is capable. Just make sure that you always line up the feeders prior to running or all you'll here is mi
Electronics Forum | Wed Aug 22 17:32:21 EDT 2012 | icin
I recently heard an interesting requirement and wanted to poll the fine members of this forum for what their interpretation would be, and if any standard would exist: "Maintain the bill of material in an anti-magnetic environment." Thanks in advanc
Electronics Forum | Fri Aug 24 07:21:51 EDT 2012 | leemeyer
The barbed fitting will work but you will lose all control over the speed of the cylinder. The air control flow valve is essentially the same as the barbed fitting but it allows the user to adjust the volume of air that is supplied to the cylinder wh
Electronics Forum | Wed Sep 05 17:22:49 EDT 2012 | jorge_quijano
I remember to have the same issue with a S20 + F4 line, after several tries, we fixed all head nozzles from machines 1 thru 4 with the most commom configuration, and let the F4 machine with the automatic nozzle changer configured with common nozzles