Electronics Forum | Mon Mar 30 08:22:07 EST 1998 | Derek Drabenstadt
Martin, I am interested in an X-Ray inspection system. Could you fax the spec sheet and application information? What type of applications did you have for the machines? (High/Low volume, High/Low Density, etc.,) Please fax it to me at 410 583-44
Electronics Forum | Mon Mar 16 20:00:47 EST 1998 | Jon Medernach
| Maybe I'm doing something wrong, but it seems to me that The Forum takes a lot longer to open up now. It also takes a lot longer to get back to the main Forum page, after reading an individual message, and hitting the "BACK" button. What's up? Is
Electronics Forum | Mon Mar 16 04:46:25 EST 1998 | Grant Petty
We have just go another batch of PCB's from our loaders, and some of the boards are severely warped. The boards are PCI cards and one of the boards is 9mm out at one end. The PCB is 210mm long and 4 layers. I am wondering if anyone knows what could
Electronics Forum | Mon Mar 16 16:57:59 EST 1998 | Earl Moon
| We have just go another batch of PCB's from our loaders, and some of the boards are severely warped. | The boards are PCI cards and one of the boards is 9mm out at one end. The PCB is 210mm long and 4 layers. | I am wondering if anyone knows what
Electronics Forum | Mon Mar 16 09:07:14 EST 1998 | Justin Medernach
| We have just go another batch of PCB's from our loaders, and some of the boards are severely warped. | The boards are PCI cards and one of the boards is 9mm out at one end. The PCB is 210mm long and 4 layers. | I am wondering if anyone knows what
Electronics Forum | Fri Mar 06 22:52:16 EST 1998 | Scott McKee
| I will be starting a conformal coating process soon, I am looking for any pointers on | 1) Best method for masking components, tape mask, liqued mask Masking tape or rubber caps will work, the ligued mask is too hard to remove. | 2) Which is best
Electronics Forum | Thu Mar 05 16:25:27 EST 1998 | Brian Stumm @ ETS
| I am looking for information on reflow temps for a flex board. There is only one 6 pin IC but the board has a 3M double sided tape. | Is it possible to reflow without damaging the tape. Any suggestions? Do you have a profiler for your reflow oven?
Electronics Forum | Sun Mar 01 15:52:13 EST 1998 | Earl Moon
| From several months I am investigation about the VOIDS PERSENCE and his important as reliability. | One question now is : | It is possible that on the BGA components the voids are already present into the balls, before the mounting on the pcb ? | I
Electronics Forum | Fri Mar 27 02:05:26 EST 1998 | Jon Gruett
AS the previous have stated there are several ways to get the BGA's off the board. Let me first ask you a couple of ?'s. 1)Are you concerned at all with the damage to the baord or the BGA? 2)Are you eventually going to need to consider the reattac
Electronics Forum | Tue Feb 24 07:13:50 EST 1998 | mike foley
| Can anyone give me any info on the effective removal of BGA's? I need to be able to take a variety of BGA's off boards quickly without creating pad damage. I am not yet concerned about the re-attach process. Hi Craig, I have been researching BGA re