Electronics Forum | Mon Jul 24 22:50:43 EDT 2017 | dawson
In fact, we can solve this problem easily. AOI only check whether the IC is soldered well. But we can ask our technician to make a test first to control the reflowing temperature and time. 1. using tool to test the temperature between the bottom IC
Electronics Forum | Tue Sep 05 14:40:08 EDT 2017 | rgduval
We emailed off forum about this...and I'm wondering how things are progressing. As I noted in email, our issue was the nozzle change was resulting in too many nozzles being out of the same vacuum channel on the tool box. I can't remember how it was
Electronics Forum | Fri Dec 22 20:28:44 EST 2017 | 1232kade
Hi everybody. I have some problem that i cant solve, someone pls help me... My Mounter Juki FX-1R cant origin. When i try to origin, the problem appear ( see attach image ) I can control air devices like ATC plate, nozzle,... But cant origin and cont
Electronics Forum | Tue Mar 20 03:45:39 EDT 2018 | reckless
Manncorp refuses to support used equipment. Plus their stuff looks like Torch ovens anyway with glorified controllers. They had a bad attitude towards their stuff. Did not sound like a responsible manufacturer to me. I did find two people suppo
Electronics Forum | Fri May 11 16:05:27 EDT 2018 | aj
questions I asked: “It seems the vision system is not reliable. However, we need to get the procedure to create and debug fine pitch parts such as BGAs anf QFN’s to understand how the machine operates.: Common errors: • Even after doing the vision t
Electronics Forum | Tue Jun 25 22:22:22 EDT 2019 | proy
We have an electrovert 16" econopak wave solder machine with two identical pots (exchange between Tin Lead and Lead Free). When the pots are exchanged the same thermocouple is used, and the same controller is used - with the set point adjusted. The S
Electronics Forum | Thu Jul 25 16:20:59 EDT 2019 | bobpan
Top red led is on or off depending on version of tep board. The green leds light when the transport sensor that it communitcates with is seeing a board over it. Tep controller init failure can be one of the following. 1. Check reseat tep card and
Electronics Forum | Tue Aug 06 16:49:57 EDT 2019 | jmedernach
HI, The short answer is, "whichever machine finds your defects." I would suggest evaluating machines based on a common vehicle. Make a bad board and identify the defects. Make a good board and have your vendor teach and tune the machine to the goo
Electronics Forum | Tue Mar 17 16:27:32 EDT 2020 | sportsradar
With LC off, the machine when told "Without LC" will zero set. It displays Error 746. After zero set, turn LC on, and it hangs up. Error 746 is IEC blocked, solutions Reboot machine and PC. And we know, rebooting isn't getting me anywhere. What car
Electronics Forum | Wed Mar 18 18:22:32 EDT 2020 | sportsradar
I have replaced both cards on the machine and the card in the PC. I have also replaced the cable. I can see where the machine is sending the request for data (by the screen shoots above). And I can see the PC is seeing something from the machine by