Electronics Forum | Sun Jul 30 12:55:13 EDT 2006 | fastek
Grant- I'm not sure when it gets to the point when egos begin to over-ride productivity but at some point it does. I remember working at a large OEM builder of NIC cards back in the early 90's. We had a line manager for each line per shift, (5 line
Electronics Forum | Tue Aug 08 20:42:11 EDT 2006 | John Erickson
Hello all, just wanted to say that I've been using MS2 for 2 months now. Yes, it does eliminate dross. Yes, it is a little messy. However, we've seen a significant drop in our DPMO's on both leaded and lead free process. The solder is so much cleaner
Electronics Forum | Wed Nov 15 15:51:21 EST 2006 | RJ K.
I have been looking into buying a rework station like ERSA or PDR. What I am questioning is how well will these systems reflow BGA's with metal top/cover that are reflective. In addition, when preheating the board would dark body packages absorb te
Electronics Forum | Wed Aug 16 13:52:24 EDT 2006 | russ
Oven settings are meaningless here. What does the board see? It is the paste we are concerned about not what the heaters are running at hehe. These solder balls are at the end of pad, which end? under the part or away from the part. I believe you
Electronics Forum | Mon Aug 21 08:34:09 EDT 2006 | Chunks
Larry, You always seem to twist things back to your wave solder process, ya nut! Anyway, why over simplify things when you are trouble shooting a process? The K.I.S.S. process was invented by your generation so I thought you of all people would l
Electronics Forum | Wed Aug 23 14:59:32 EDT 2006 | bill
I�ve been lurking on the forum for a while so I will take a stab at this, mainly because there is no answer I take it that you have a variety of boards being produced at the same time and are in fixtures so the conveyors don�t need to be adjusted, a
Electronics Forum | Mon Aug 21 10:36:25 EDT 2006 | vikkaraja
I Think I understand your problem. But I think it would be best if you just go in the program and change/check your componet height as needed. It does not take much time. Check your cap height, modify shape data as needed, generate your program and
Electronics Forum | Tue Aug 22 15:57:17 EDT 2006 | slthomas
As far as room goes, I have to talk my boss into getting rid of some other crap around here before looking at the Mydata. The room is there, it's just occupied by stuff we NEVER use. My understanding of the TP-9 is that it's considered flexible but
Electronics Forum | Thu Sep 07 08:18:19 EDT 2006 | Rob
Hi Pavel, Great machines - very good for high volume - we did a lot of OEM overflow work and for fault finding & speed it kicked the other more expensive machines into touch. However... Programming is a lot slower initially than some of the othe
Electronics Forum | Thu Aug 31 18:58:37 EDT 2006 | chrisgriffin
Fastek, You are correct. I know of machines you can get for 25k that are in working condition. But if I was going to buy one used, I would want it refurbished and calibrated. I would also be interested in support and warranty. I don't know of an