Electronics Forum | Fri Apr 23 17:59:54 EDT 2010 | hegemon
Therein lies the issue. Unknown storage conditions before we received the PCBs, date codes just expired (2 weeks), first article is de-lam city! Had a bad feeling about it. Have read some studies showing that there is no linear tie in of visual cha
Electronics Forum | Mon Jun 07 15:33:08 EDT 2010 | bderks
Hi, I'm working at a very small electronics assembly firm and we need to get a better thermal profile of our reflow and solder wave ovens. Our firm is part of a larger firm that was set up to help handicapped people find work in the Netherlands. Yo
Electronics Forum | Fri Jul 09 19:09:52 EDT 2010 | rway
A couple of things: Does the cap break if you try to remove it with hot air? If not, than you are breaking the caps do to mechanical stress. We have had similar issues. I don't think your board is suffering from mechanical stress from depaneling o
Electronics Forum | Fri Aug 20 19:01:26 EDT 2010 | varivenca
VARIVEN,C.A, is a newly emerging company in the electronics field. Variven was established in 2009 to take care of design, repair and maintainance of pcb cards and electronic machinery for oil companies. As of now we are creating basic boards for o
Electronics Forum | Thu Dec 30 04:59:19 EST 2010 | tpappano
Hello David, there are people here running these fine old machines. I have two, one I've been running for two years and another I've just acquired. It is not required to have a computer connected, but it will become handy for backing up and maintain
Electronics Forum | Mon Mar 21 02:41:29 EDT 2011 | kemasta
Hi It's me again. Our products need to pass a chamber test 45c/36hrs after the PCBA completed batch of functional tests and assemble in to case. We found 1 unit was functioning for 24hours in the chamber, but hang after that. We tried to re-boot the
Electronics Forum | Fri Jun 03 11:13:28 EDT 2011 | jeremymc
I've been running a MYDATA TP11 for over a year now and yesterday when I turned it on I was given an error that I have never seen before. It had been a week since the last time I had used the machine and when it was turned on it told me that there
Electronics Forum | Fri Jun 17 16:15:41 EDT 2011 | rway
One problem you may have with deeper scoring is not so much broads breaking apart unintentionally, but warping upstream while on the SMT line which can cause sagging. This may give you transport issues from one machine to another, and if you have an
Electronics Forum | Sun Jul 24 16:10:16 EDT 2011 | davef
As a shot in the dark response to a hopelessly vague question .... Back in the old days, we'd see corrosion of metal parts after DI water washing when our water was on the high-end of the resistivity range, usually after we received fresh tanks from
Electronics Forum | Tue Sep 20 14:03:53 EDT 2011 | russw
We don't have the equipment to check specific gravity, we just assume what's on the bottle is correct and we've never had a problem. The stone sits in an open chamber, so there really isn't any pressure to check. When we vary the air flow, the foam