Electronics Forum | Sun Feb 18 16:47:34 EST 2007 | darby
As I stated, the reply was direct from Indium, (thanks to Rich Brooks). The information regarding cool down rates should come from your paste supplier; not an oven supplier; not a generic article on lead free. I just went through the data sheets from
Electronics Forum | Fri Feb 16 06:47:38 EST 2007 | CL
vshan, We were using pallets (delmat with cavities for the flex) We put stips of double sided Kapton tape in the critical areas. The tape held up to the heat and kept the circuit flat for the QFP's and BGA's. We based our assembly process for this c
Electronics Forum | Thu Feb 15 16:58:11 EST 2007 | flipit
Phil, I used to print solder paste on 2" X 2" and 3" X 3" 96% Alumina substrates all the time. I used standard solder printers and stencils. Screens are difficult to use and don't print well. You can use a stencil on a DeHart, CW Price, or AMI Pr
Electronics Forum | Thu Feb 15 15:23:12 EST 2007 | bvdb
The IP-1 vision error is" "Processing Error" er 401F 4003 which the FIP-I Operating Manual says the cause is "The actual number of leads on the part exceeds the number of leads in the Part Data". I have checked and re-checked the part data, lead
Electronics Forum | Mon Feb 19 17:34:02 EST 2007 | GS
Thank You Pavel and Dave, Unfortunately I do not have IPC-4554. Anyway I 0.6-1.0umm is what I remember, and confirmed by reading also through leterature available on google. I was just going to understand if it possible to obtain more thickness
Electronics Forum | Mon Feb 19 10:04:21 EST 2007 | realchunks
It's a nasty little part, but usuallu solders well. Now your inspectors will thing it's not soldered and try and touch it up, but generally, the exposed leads are not tinned, and will not toe fillet. If they know this up front they won't over heat
Electronics Forum | Tue Feb 20 06:31:58 EST 2007 | mika
It depends on what VME box build it is. Rev. C, D, E etc. There are upgrade kits for the complete VME chassi and it includes some re-wiring also. For this You must contact UIC and provide them with the machine ser.nr, current Os-system, UPS s/w ver.
Electronics Forum | Wed Feb 21 15:16:52 EST 2007 | wavemasterlarry
sure sounds like alot of over kill. You can get all the info you need by running your machine. Keep the dross cleamed outof it and replace the flux stone every so often and you shouldn't have any problems. Them fancy machines are no match for real
Electronics Forum | Tue Feb 27 12:16:19 EST 2007 | wavemasterlarry
hahaha! LISTEN, everyone knows that oven get dirty. They need periodic cleaning. So if you run lead boards thru your oven you will get lead dust and residue in you're oven. If you want to be truely lead free you need to get all the lead outta of
Electronics Forum | Wed Feb 21 12:40:44 EST 2007 | jmelson
There is a Quad 1000 in eBay stores, but I can't get much info on what a Quad 1000 can or can't do. It appears to be a "chip shooter", but can it do 0805 passives, too? Does it need an option to do those? Does the 1000 have some form of optical ce