Electronics Forum | Wed Aug 10 01:28:40 EDT 2022 | davef
Below are several suppliers. KingFei and FKN Systek sponsor SMTnet. KingFei SMT Tech [ https://smtnet.com/company/index.cfm?fuseaction=view_company&company_id=53598 ] FKN Systek Products [ https://smtnet.com/company/index.cfm?fuseaction=product_cat
Electronics Forum | Tue Aug 16 14:03:00 EDT 2022 | proceng1
We currently use Aegis CircuitCam for our Production work instructions, and machine programs. I am looking for an alternative, as CC is no longer supported. We receive Gerbers (sometimes CAD files) and BOM from our customers. That is all that I can
Electronics Forum | Tue Aug 16 20:11:34 EDT 2022 | emeto
If you run a TH parts, X-ray is needed in 95% of the cases. AOI will be your SMT criteria except bottom terminated components(need X-ray). After equipment, you should still have 4X 6X 10X 20X optical checks based on part size. Building PCBAs without
Electronics Forum | Wed Aug 17 11:16:33 EDT 2022 | thegreatresisthor
Hello everybody, has anyone else encountered the malfunction of the head crashing against the right inner board side of it´s cabin after hitting the stop button whilst an fiducial error happens? as far as i know from my collegues its not always in th
Electronics Forum | Tue Aug 23 13:44:46 EDT 2022 | jojoled
Can anybody recomend a (LED-safe) flux removing/cleaning liquid, which can be used in ultrasonic cleaner in immersive application? After using one product I have been told, that none of the top suppliers of chemicals have this kind of liquid (subject
Electronics Forum | Fri Aug 26 10:55:31 EDT 2022 | kumarb
a DOS USB stack will be required. If Windows -> the USB driver for this device will be required. If Juki has a custom OS then even less of a chance of a success. In all cases, you are introducing far too many layers of unnecessary software that is d
Electronics Forum | Fri Sep 02 21:34:35 EDT 2022 | dwl
Are they getting hung up transferring from one conveyor to the next? One thing we did was put a rounded chamfer on our PCB corners. I think it was a 1mm diameter. This stopped our boards from getting stuck. A few other random ideas to look at; Make
Electronics Forum | Mon Sep 05 11:51:30 EDT 2022 | jojoled
Can anybody help with Re-calibrating the Z-axis height in MS parameter , on JUKI KE760L? In MS parameter manual, there is information that these accessories are needed to recalibrate the Z-axis , can anybody tell where to get them, or ideally how to
Electronics Forum | Thu Sep 08 18:10:09 EDT 2022 | mt396596
We just went through a similar issue with our MY12E. Make sure your Midas vacuum system is working, check your Midas Z friction. Also verify the Centering unit centering band. You can swap your MOTZ and MOTC to rule out the card. The tool install t
Electronics Forum | Mon Sep 12 20:24:26 EDT 2022 | stephendo
I'll answer the easy part. If you put low temperature trays in the oven at 120C, they will warp and partially melt. I have seen it more often with reels of LEDs. Someone is told to bake them before use so the put them in the batch oven and the next
