Electronics Forum | Sat Sep 29 22:56:13 EDT 2007 | asoelu
the vary results might be from following issues.. the co2 during the test the during time for this testing... the manual testing method is conductivity measurement however the bulk contamination tester like omega is resistance measurement (i remem
Electronics Forum | Wed Sep 26 17:26:02 EDT 2007 | jax
So far, So good! We are currently standardizing the Lightning Head Advantis as our chip-shooter. We only place chip packages, 0201-1206 with the Lightning Head and everything runs great. We performed qualification testing with components up to 20mm
Electronics Forum | Mon Oct 01 11:54:56 EDT 2007 | dyoungquist
Last I heard the Mydata MY500 jet printer was in the $275k-$325k range. If it does all they claim, I would love to have one. However, we only buy 45-50 screens each year and have only a small amount of rework due to paste errors that the MY500 woul
Electronics Forum | Thu Sep 27 17:25:33 EDT 2007 | chef
The short answer is immediately after reflow the problem occurs. To be more exact, what you are describing is not "rust". Rust occurs in iron. The oxidation that occurs in Tin-Lead has been sometimes called "white rust". Either way, oxidation occur
Electronics Forum | Mon Oct 01 10:35:52 EDT 2007 | adlsmt
DBA tried to re-write thier software at least twice and failed. They ended up buying/partnering with EZ-Jobz from I think Austrailia. The new product and the old product are not the same at all in any way. Manex was originally based on FoxPro. We are
Electronics Forum | Mon Oct 01 18:08:09 EDT 2007 | allgood
Aegis always told me that they wouldnt go into the full MRP thing believing that this was not their core speciality even though it would make sense but last I heard was that they were talking to Manex about making the two systems interact - this was
Electronics Forum | Mon Oct 01 18:14:43 EDT 2007 | allgood
Origin is New Zealand I believe - which means it has been regionalised to the US and I want it put back to British. "Old" DBA seems to have been put out to grass so I am ignoring that one. My present MRP is FoxPro based - and is being rewritten in
Electronics Forum | Mon Oct 01 09:16:35 EDT 2007 | pbxtech
I have the Weller WTA50 desoldering tweezers, and have a question for any of you that use these. Quite a few times when I need to replace the tips on these things, the two little screws are So stuck, I either end up stripping the inside of them or ou
Electronics Forum | Tue Oct 02 16:34:43 EDT 2007 | jmelson
Ungar used to sell a little tube of clear stuff that they called something like "tip anti-seize". I used it on Imperial irons, back in the days before electronic temperature control. The pure copper threads on the heating element would seize to the
Electronics Forum | Tue Oct 02 10:01:15 EDT 2007 | chrisgriffin
I once had a similar problem on a VIP98. The problem was with the FCU (furnace control unit). There was a burned IC on the lower left of the card. I don't remember what kind of part it was, only that it was very common and I got a new one from Dig