Electronics Forum | Thu Aug 21 15:41:18 EDT 2008 | dphilbrick
We had the same problem, same brand part. We were running 3 different flavors only had the issue with one reel. Swaped out that reel for another and the problem went away.
Electronics Forum | Thu Dec 04 15:40:05 EST 2008 | dougt
Do a search here for SMEMA standards, I had problems a while back and had to swap some wires on an OEM's machine to get it to interface correctly to our equipment. Probably not the same problem as your having but I did write a long winded explinatio
Electronics Forum | Wed Dec 31 14:27:56 EST 2008 | wavemasterlarry
Listen, get some training,. My brother Herb got sick as hell from playing around with our X-Ray machine. Danged fool stuck his head in there for sh*ts and giggles and had to take some time off. Had to get a system after that too!
Electronics Forum | Mon Jun 15 09:59:42 EDT 2009 | kris1128
Hi Hoss67, I have had really good luck with PVA (Precision Valve and Automation) as Dave had mentioned also. Good pricing on all types of systems and good design crew for special applications. They also provide UV curing systems if needed. Hope it
Electronics Forum | Tue Aug 03 17:13:41 EDT 2010 | bradlanger
Craig, If it is LF Hasl it sounds like it applied too thin exposing the intermetallic layer wich is not solderable. We call out a minimum thickness of 80 microinches and have good results. We have had shops in the past that did not control the Hasl
Electronics Forum | Fri Sep 03 08:25:30 EDT 2010 | remullis
I removed the muffler yesterday and still had the latch releasing issue, the latch was tight, however the table had some play in it. I adjusted the play out of the table, setup table zero and it fixed the problem. Same symptom as if the latch were lo
Electronics Forum | Tue Sep 28 15:33:53 EDT 2010 | babe7362000
V-Tek TM-50 is a great machine. We have had it about 5 years and never had a problem with it. Easy to setup and easy for the operators. Hope that helps...
Electronics Forum | Wed Oct 06 16:57:21 EDT 2010 | kjs123p
We've had 2 of them for a couple of years now. Really haven't had any issues with them. I feel they are worth the money.
Electronics Forum | Mon Jan 03 14:38:42 EST 2011 | leemeyer
I had this problem awhile back and it turned out to be a problem with the computer Bios settings. The battery had gone dead and the settings were set back to the default state. Luckily I have 2 of these machines and was able to reset the Bios configu
Electronics Forum | Sat Mar 26 02:38:07 EDT 2011 | evans1001
Had an issue with spindle 2 not coming down and picking parts up, then it was but not placing the part. The other 3 spindles were working fine. Changed the head on the machine but stil had the same issues. Anyone with any ideas. Cheers