Electronics Forum | Thu Sep 16 11:57:27 EDT 2004 | Gary
I have a Jewel box and have found it to be a very simple system to operate. We have had several turn overs with operators and the new people master the machine in a very short period of time. You are right. This is an excellent machine.
Electronics Forum | Mon Sep 27 14:01:45 EDT 2004 | scombs
Has anyone out there had any long term experience with either of these stencil systems? I'm looking for feedback on how the foils hold up, operator interface etc. Thanks in advance. Steve
Electronics Forum | Fri Oct 08 09:08:32 EDT 2004 | russ
I've never had one "float" in the wave. Have you tried waving yet to see? Anyway, glue would work, or you could place a a small weight on top, or clinch a couple of leads. Russ
Electronics Forum | Tue Oct 19 13:35:22 EDT 2004 | marc
Seeing a product such as this and thinking about simple engineering. Every lightning rod I have ever seen on a building, home, tower, etc... had this long metal device called a "conductive wire" that runs into the ground. I'll stick with the ligh
Electronics Forum | Wed Nov 03 07:12:01 EST 2004 | davef
We've had discussions similar to this previously. Search the fine SMTnet Archives, while you're waiting for others to respond.
Electronics Forum | Fri Nov 19 13:46:14 EST 2004 | Dreamsniper
I used ASSCON VP450 with Galden 205 Fluid. It worked fine. Good Solder Joint Quality. I'm not promoting the product just sharing what I had.
Electronics Forum | Mon Nov 15 23:34:53 EST 2004 | KEN
I have had this problem on tant-D's. Do a memory dump. Re-transmit status and proper. May help....may not. Also, is this the last mount?
Electronics Forum | Mon Nov 22 05:22:29 EST 2004 | Rob
Hi Harry, We had some of the ECU's, but all they are is a heater & a chiller, and the controller turns on whichever one is required. Unfortunately the contollers were pants so our lab made their own. Rob.
Electronics Forum | Tue Nov 23 09:38:10 EST 2004 | brent.robinson@donnellye.com
Hi Bill, Thanks for the info. I already had that document downloaded and saved. Some very good information there. It is soon to be out of my hands. I have collected the info, now to get people to make a decision about what they want to do an
Electronics Forum | Mon Dec 06 21:41:13 EST 2004 | pdeuel
I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long