Electronics Forum | Tue Apr 26 15:57:59 EDT 2022 | proceng1
I didn't look into the two pad layouts and what they look like, but here is what I tell my operators. When the solder goes to liquidous, the surface tension will pull on the part from each pad, essentially centering the part. Assuming that the pads
Electronics Forum | Tue Aug 02 20:12:33 EDT 2022 | cbeneat
So these are XPE's? Are they CM402's or 602's? Are you using custom nozzles? We've had the same issues over the years. We've gotten our custom nozzles from Count on Tools, I actually have 10 new ones on the way. Slowing the placement speed, increasin
Electronics Forum | Wed Oct 19 17:39:51 EDT 2022 | rgduval
The Agilis feeders are much more reliable than the old TM feeders. You can tweak the TMs a little bit, but, it can be a pain. Agilis have better repeatability, and built in y axis correction for 0402 and smaller parts. On the newer machines (My se
Electronics Forum | Mon Dec 19 21:34:47 EST 2022 | stephendo
To add to that we once had to replace the gaskets in a very old oven. We couldn't find any so we used a high temperature sealant. And then realized that they weren't gaskets originally, it was originally sealed with high temperature sealant. After it
Electronics Forum | Thu Mar 30 08:04:56 EDT 2023 | hub
Hello, I'm looking for zevatech (juki) 570 owner that could help me to resolve my problem. I had the following error that occure just before (or sometime a few after) homing the machine : "E7018:Driver Error KNOCK position error ". Previsously I had
Electronics Forum | Fri Apr 21 07:18:40 EDT 2023 | spoiltforchoice
I had quotes for a MY100 -14 a Juki KE-1080 and an iPulse M6ez back in 2011 and at that point all those machines were about the same price with a light feeder package. The MyData however was the only one configured with smart feeders, a tray feeder a
Electronics Forum | Thu Jun 01 12:54:33 EDT 2023 | tommy_magyar
I am using 2x SP710, one is 5 years old, the other one is one year old. The old one never had an issue, the new one had a camera problem when it was installed, but it was changed under warranty - no problem ever since. Very easy to use. I only ever
Electronics Forum | Mon Jun 19 20:37:59 EDT 2023 | stephendo
I recommend Denise Hagge d.hagge@vtekusa.com> but they have a minimum order quantity. You can at least check out their web site. One time we needed tape and reel before we had the module built. Everyone else pretty much wanted exact dimensions
Electronics Forum | Thu Sep 07 15:20:58 EDT 2023 | rjroaquin6
Hello All, I recently had a case of excessive tin coming from a solder pot sample. The solder is SN63 but the results of testing had a 64.97% for Sn. The J-STD-001 spec is 61.5% to 64.5%. The pot is used to pre-tin wires which will then be solder
Electronics Forum | Fri Feb 23 14:50:14 EST 2024 | carl_p
That link doesn't work for me. From the more you explain - it does sound like an issue I've had in the past on a few different builds. In the end we traced it to a fault with the paste (they were having mixing issues in the chemistry) but they as y