Electronics Forum | Wed Mar 29 13:18:17 EST 2006 | Alex
We use an Asymtek C-741 with 2 heads for silicone and acrylics but no convoyer. What type of head and product will you use ?
Electronics Forum | Sat Jul 08 10:14:17 EDT 2006 | larryw
Have you had you head splines inspected for dirt or contamination which would cause heads to stick? Make sure the your Splines are not bent; that they are clean, and last that your nozzle station is taught correctly. How often do you service you equi
Electronics Forum | Thu Sep 28 08:20:08 EDT 2006 | Brian
Stick with what you already know. A GSM1 with a 4 spindle head is the way to go. Its excellent for balancing a line becuase you can place anything with it. Or if you need to dispence glue or odd form parts you can add another head later.
Electronics Forum | Wed Mar 21 17:47:05 EDT 2007 | darby
You need to use the H nozzle and 4 small jaws (1005). Have the slot in the jaws machined towards the rear of the jaw to increase reach. Set up and calibrate that head with that chucking assembly. Always use the same chucking assembly on the same he
Electronics Forum | Fri Sep 21 17:46:07 EDT 2007 | chrisgriffin
Right you are. Count on it taking at least an hour if you've never done it before. I think they made the pro-head way too complicated. Standard UP style heads are so much easier.
Electronics Forum | Mon Apr 07 15:40:05 EDT 2008 | pjc
Pump print heads do not print better. Blades print faster and better quality than pump print heads.
Electronics Forum | Fri Aug 29 09:13:48 EDT 2008 | tech1
We received one about 5 weeks ago, about 65% faster and still have all the flexibility of our original mydata machines. On a side note we had a head to head competition between them and juki for a week.
Electronics Forum | Fri Jan 16 10:54:21 EST 2009 | realchunks
Hi Steve, Make sure your spray head is all the way down. If so, try slowing your rate of speed over the part. Which head are you using to coat this part?
Electronics Forum | Wed Sep 23 21:40:29 EDT 2009 | davef
We apply temporary solder mask off line, using a programmable dispense head. Works fine. Purchasing a placement machine with a dispense head usually only works-out well for the sales-type. Not in every case, but usually.
Electronics Forum | Tue Feb 09 13:27:05 EST 2010 | duchoang
Re-optimize the program. One (or more) head(s) can not reach and pick up parts from certain feeders.
