Electronics Forum | Wed Aug 12 22:28:20 EDT 2009 | boardhouse
When choosing materials, do you specify your > thermal PCB needs? For instance, are you > specifying temperature or are you selecting > materials by brand name? With this type of product I would call out the material Manufacture and brand - Such
Electronics Forum | Thu Aug 13 12:23:39 EDT 2009 | robhs
Thanks Dave. What you say makes complete sense. We ran a job a short while back in this way (though without bonding) and found we had a much higher than normal failure of the BGAs which I can only attribute to the secondary reflow. As I have only got
Electronics Forum | Mon Aug 24 06:12:31 EDT 2009 | ghepo
joanne please pay attention, each heavy no-clean flux residues not completely heated due to hand soldering becomes a moisture absorbing conductive pathway, causing electrical leakage. So I suggest you to clean well the board after hand soldering or
Electronics Forum | Tue Sep 01 11:25:19 EDT 2009 | rocko
Hi davef, Thanks for the suggestion. I have inspected the heaters but I think they are OK (no visible coating, deposits, etc.). Unfortunately, I'm not sure that the residues are ionic. It was just preliminary report of the person responsible for the
Electronics Forum | Wed Sep 23 08:17:46 EDT 2009 | kpm135
I've run into mysterious light curtain errors before and what was happening was when the head moved across the top of the components one of the clear tape covers would flutter up and trigger the curtain then it would settle back down on top of the ta
Electronics Forum | Tue Jan 12 21:24:13 EST 2010 | graceytiu07
We have a Viscom SPI S3054QS. Yup, the machine offers a quite good speed. My board dimension is 150 by 250mm. The cycle time is only about 24 sec. The analyze time is only about 10sec. You can make your loading faster, if that's what you needed. I ha
Electronics Forum | Mon Oct 19 12:17:16 EDT 2009 | wrongway
We have yet had the need to use local fids on our boards you must be putting down pretty fine pitch parts that are needing the acurcey if it is failing fids that are within the search area then maybe its somthing else size our lighting it should fin
Electronics Forum | Thu Nov 05 03:40:34 EST 2009 | valeo
Hi Rajeshmara, Mail sent with the datasheet of the glue we use in production. Thanks for first information you provide me for the shear specifications on 1206. But can you be more precise on this point ? How did you define it ? Is anyone have more
Electronics Forum | Mon Nov 09 18:54:27 EST 2009 | aqueous
The AQ400 Series (manufactured between 1992 and 1996 used a Myron-L brand resistivity controller. If you purchased this machine from Aqueous Technologies you would have received a Myron-L manual which describes the calibration procedure in detail.
Electronics Forum | Tue Jan 12 14:19:23 EST 2010 | deltaservices
Hello Andrew, For programming a single Topaz or Emerald you need only the Cad2cad 1.5 (Freeware) With this program you can generate a VIOS.TXT file based on your position data. You import this in the machine and add your component and Fiducial d