Electronics Forum | Thu Feb 28 21:01:09 EST 2008 | davef
Tony: Thanks posting information about your experience with strippers. First, why did you need to strip the entire board? Next, please clarify the following points to expand our knowledge of using Humiseal 1063 Stripper: * How long was the conforma
Electronics Forum | Thu Nov 19 05:18:37 EST 2009 | prodivegsr
Hi All, Recently we are working on the conformal coating process using Humiseal chemical 1B73 and thinner 521. Bubbles on component body/joints are seen after gone through the IR Reflow Oven. During the conformal coating, only tiny bubbles seen af
Electronics Forum | Tue Nov 01 10:06:00 EDT 2011 | davef
Humiseal says: Typically, there are three main approaches to avoid coating wicking into press-fit connectors (and other keep out areas). Wicking is a phenomenon caused by a combination of low viscosity of conformal coating material and strong capilla
Electronics Forum | Tue Jul 25 16:08:52 EDT 2017 | dontfeedphils
I'm currently working on bringing a manual coating process/workcenter online and my QA team is giving me some grief. For background, we're using Humiseal 1B31 thinned with thinner 521, mixed at 1:1 by volume. Spraying through a Binks HVLP with 10 P
Electronics Forum | Thu Aug 19 19:04:55 EDT 1999 | Brian Wycoff
| | Can anyone help on the subject of de-wetting during the spray coating process. We use PC29M Parts A+B spray coating material, Humiseal tapes and masking dots, Marigold supertouch V70N gloves and Concoat CM533 liquid masking material. We also use
Electronics Forum | Wed Jan 27 09:00:56 EST 1999 | Chris Fontaine
| | I have boards coated with Humiseal 1B73. At a late point mfg. site we need to remove a series of 0603 resistors for optioning purposes. I have been trying to determine the fastest, easiest way to re-coat the pads after removal. Drying time of the
Electronics Forum | Wed Feb 27 13:11:04 EST 2008 | tonyamenson
I was asked to post my finding about HumiSeal stripper for polyurethane coating. Both as an information sharing as well as someone who may offer advice on teh situational use of 1063 solvent stripper. So here is what I found: The stripper worked t
Electronics Forum | Tue Jul 28 17:35:07 EDT 1998 | Brian Stumm
Steve, I know it is tempting to go for the cheapest method of applying conformal coatings but I must warn you. If you are a contract manufacturer then you don't want to limit yourself in the types of coatings you can work with. Just as soon as you se
Electronics Forum | Tue Jul 28 17:44:03 EDT 1998 | Brian Stumm
| Steve, | I know it is tempting to go for the cheapest method of applying conformal coatings but I must warn you. If you are a contract manufacturer then you don't want to limit yourself in the types of coatings you can work with. Just as soon as yo
Electronics Forum | Fri Jul 24 13:04:55 EDT 1998 | Dave F
| Hey youse guyz... | We're finally getting our first real job at the start-up I'm working at. It's actually a pretty unique little board too. Simple as all get out, but unique. You're not gonna believe what this goes into...guess? (I bet ya' you'll
