Electronics Forum | Thu Jul 20 13:28:13 EDT 2000 | Bob Willis
On all the trials I have done I have made no changes to the stencil thickness or apertures than the normal changes we make for our process. I have not changed any thing in terms on volume of solder for more reliable joints. I fact I have not read any
Electronics Forum | Mon Jul 02 20:13:41 EDT 2001 | davef
We agree with Wolfgang. Adding points along his line of reasoning: * Also consider placed component prescience. Sometimes, a mis-pick results in paste on the nozzle, which leads to the next component being stuck on the nozzle and not placed, which
Electronics Forum | Tue Dec 14 17:02:04 EST 1999 | John Thorup
Hello Kris If you do have and OSP coating I'd say Curtis has nailed it. But you seem to have references to gold. Does this board have a standard nickle/gold finish. If so what sort of "solder on gold" problems were you having? Reading between the
Electronics Forum | Tue Dec 07 16:34:54 EST 1999 | Russ
Wolfgang, I appreciate your continued feedback! The main reason that I shortened the Time Above Liquidous (TAL) was it appeared that I was burning off all of the flux from the paste. By shortening the TAL to 45 seconds and decreasing peak temp to
Electronics Forum | Thu Nov 18 10:56:16 EST 1999 | Dave F
Jacky: There�re major four factors that affect the reliability of a solder connection. 1 Design of the connection including the shape and height of the lead and the type and amount of solder. 2 Dissolution of base metals into the solder connection.
Electronics Forum | Fri Oct 08 16:36:59 EDT 1999 | Dave F
| We've recently encountered this problem where one of our .050" pitch BGA's were reflowing at the wave thus causing shorts... The board was profiled with probes stuck to a QFP solder joint, an 0603, and one of the BGA joints. There was an almost 7
Electronics Forum | Mon Oct 11 08:34:52 EDT 1999 | C.K.
Thanks for the acvice, Dave and John. Like I stated above, I didn't feel comfortable with changing wave parameters since I knew that we'd be compromising our wave quality. I'll try the peelable mask thing, reprofile, and let you guys know what i fo
Electronics Forum | Thu Oct 07 16:57:02 EDT 1999 | Glenn Robertson
| | I have a board, 4 spacers needed to be soldered on the board | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, there wi
Electronics Forum | Fri Oct 08 08:26:03 EDT 1999 | Carol Zhang
| | | I have a board, 4 spacers needed to be soldered on the board | | | first with the normal 62Sn37Pb alloy. Then, capacitors are manually soldered on the boards. The density of the board is quite high. If we wave soldered capacitors first, ther
Electronics Forum | Wed Sep 08 15:16:50 EDT 1999 | Jason Gregory
| | | Hello: | | | We are using a Heller 1500S reflow oven to solder surface mount parts. Just within the last two weeks, the larger I.C.'s are moving while going through the oven. The parts are checked for placement before putting into the ov