Electronics Forum | Thu May 07 18:30:38 EDT 1998 | Peter
We just purchased Mitron/GR Software's CB97. We have Universal's 4790 and Contact's 3AV machines. Both these machines part libraries are in binary format and their respective software packages cannot export out into ASCII. Has anyone out there discov
Electronics Forum | Thu Dec 13 21:02:38 EST 2001 | davef
Contact the fabricator of this part for their recommendations. There is about as many different approaches to soldering thermistors as there is thermistors. You imply that this is a SMT style package. If that is correct, it's curious that the comp
Electronics Forum | Wed Jul 02 14:25:14 EDT 2003 | Earl Wildes
Greetings. Does anyone know of a good reference on the proper physical handling of surface mount devices? We have a number of very small builds, so our stockroom is very often issuing single piece quantities. The parts are protected from ESD, but
Electronics Forum | Thu Dec 11 23:38:44 EST 2003 | liang
Thank you Stefan for your help! our machine is hs50.you are right we means components are not placed on board.we can found the part around the loctation.i found bearing is dirty.i clean it with threebond.it can work well. but i want to know the rootc
Electronics Forum | Tue May 19 12:09:08 EDT 2020 | greezmky
Thank you all that contributed to the troubleshooting! I measured the height of 10+ parts with calipers and found the average to be around 2.15mm. In the program height was set to 2.42mm. I reduced the height to 2.15mm. I have since ran 561 boards
Electronics Forum | Wed May 06 18:15:03 EDT 2020 | travishemen
I thought i posted this last night. The easiest way I can think of to see what nozzle is being used is to put the machine in step mode and do one part at a time. Also the levelness of the table and Z0 could be suspect. On a CP643 this can get out
Electronics Forum | Thu May 07 16:10:37 EDT 2020 | greezmky
Being new to the industry, the question is how much squish should I see once the part is pushed into the paste? Is there a recommended offset to create the perfect impression in the paste? I did notice yesterday that the height called out in the pro
Electronics Forum | Sat Dec 13 08:03:46 EST 2003 | Stefan Witte
The only part, which could cause component misplacement on the rotary heads of the Siplace machine is the vacuum valve. I don�t know the official name in the part catalog, but I use to name it plunger. The plunger is moved in and out by a miniature s
Electronics Forum | Tue Dec 16 01:33:25 EST 2003 | liang
hi sam thank your support.your meaning adjust dynamic of the z-axis ?"WE FOUND BEARING UP AND DOWN WITH SOUND "KA,KA"", when we pull out the sleeve ,moving sleeve ,the bearing UP AND DOWN WITH SOUND "KA,KA"".
Electronics Forum | Tue Sep 20 13:11:48 EDT 2016 | ladmo1
I do have a couple pictures, but they aren't very clear and I am not sure how to post them on this site yet.
