Electronics Forum | Mon May 25 08:30:48 EDT 2009 | cyber_wolf
I assure you this is no add. I have posted on here for years, and NO we do not recieve benefit from Juki. I am just a technical guy that has worked in the trenches every day with various pick and place machines over the years. Let me re-state that I
Electronics Forum | Thu Jun 25 22:00:54 EDT 2009 | hayee
Hi, I want to make a small setup for manufacturing PCB's based on SMD's for (pototyping boards, etc). I don't know clearly what are the equipments required for this purpose. I have an idea that we have to use (Pick n place station, Screen printing
Electronics Forum | Fri Aug 28 19:15:13 EDT 2009 | edmentzer
Have you used the EXCEL MACRO that MYDATA used to give out at no cost? We have been using the MACRO for 9 years and it is very good. Contact me if you are interested in the EXCEL MACRO. I can usualy edit the pick and place data with macro for a bo
Electronics Forum | Thu Nov 19 14:35:02 EST 2009 | rrpowers
We do continuous reel-to-reel flex circuit PCB's with a typical "panel" width being 12". (The PCB pattern repeats every 12".) We have done some product that was 24" by doing one half of the board then the other through the screen printer. We have
Electronics Forum | Thu Feb 25 20:25:16 EST 2010 | dean
Good question, the answer as of right now is yes. Our machine is only able to go down to 0402 parts before the surface tension of the solder begins to cause issues with maintaining the placement position of the part on the nozzle. However, we are dev
Electronics Forum | Wed Mar 03 19:30:37 EST 2010 | dcell_1t
Yes, it is basically: Rate = Time interval/Cycle time I put time interval since you can measure however you want (pc per hour, per day, per quarter hour... it is relative) the most used is Pc/Hour, so the time interval is 1 hour (3600 sec). Lets sa
Electronics Forum | Mon Mar 22 07:40:01 EDT 2010 | emanuel
Are you absolutely sure the problem is with the humidity? We had a problem with 3528 size leds, damaged by the pick and place nozzle because a 0.2mm mistake in the height measurement. Also, we found that several suppliers are using fake desiccant ba
Electronics Forum | Wed Jul 07 10:17:33 EDT 2010 | flipit
We have this problem only with one manufacturer of LEDs. Avago LEDs give us the problems where SunLED and KingBright do not. We put a magnet under the embossed cover tape. The magnet is mounted to the feeder. Holds the part in the tape pocket. L
Electronics Forum | Tue Jul 20 15:02:49 EDT 2010 | vetteboy86
I've seen this warp issue across several different PCB's we assemble. One of the biggest head ache's is getting the boards to transfer between machines, converyors, and inside our pick and place. Due to the warpage, transport between conveyors is dif
Electronics Forum | Fri Jan 28 00:42:04 EST 2011 | cpcompany
Anyone know where I can find M1 and M2 nozzles > for a Samsung CP30 pick and place? I used to be > able to get them from Samsung, but they don't > support the machine any more. Dear Sir I have tried to find any nozzles on stock but there is no
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Equipment Dealer / Broker / Auctions
13227 Royal George Avenue
Odessa, FL USA
Phone: 813-992-2437
.gif)
.gif)
