Electronics Forum | Wed Mar 31 04:43:52 EDT 2010 | accuspares
If you dissconnect the crash beam sensor one at a time at the front leaving the remaining one connected you’ll be able to identify what side is causing the problem. Then you will be able to hopefully remove the object or adjust the position of the be
Electronics Forum | Tue Jul 06 23:12:02 EDT 2010 | bubbobbed
hey, I'm having the same problem as you are. the component is sticking on the cover tape prior to pick and place. hoe do you address the problem??
Electronics Forum | Wed Sep 15 04:12:11 EDT 2010 | headlad
We had a similar problem so we shrunk the thermal and extended the pads. This allowed us to ensure solder resist was applied to the track in between. It fixed our problem.
Electronics Forum | Fri Oct 22 03:32:58 EDT 2010 | bullyparade
Hi all, could solve the problem already - however thanks for your advices! The problem was caused by a defective relais (loose contact - just resoldered it) in the relatetd circuit.
Electronics Forum | Mon Jan 03 14:38:42 EST 2011 | leemeyer
I had this problem awhile back and it turned out to be a problem with the computer Bios settings. The battery had gone dead and the settings were set back to the default state. Luckily I have 2 of these machines and was able to reset the Bios configu
Electronics Forum | Wed Jan 12 10:41:20 EST 2011 | padawanlinuxero
Hello guys ! I have a problem, I am finding some blow holes in the solder join in a resistors pad, can this be because of high humidity in the board? does baking the boards fix the problem? thanks
Electronics Forum | Tue Aug 02 09:46:49 EDT 2011 | emeto
Hi , we have the same machine and exactly the same problems. I was thinking that a software update might help with both problems, but we still don't have it. In my opinion they are both software issues.
Electronics Forum | Thu Oct 06 10:05:33 EDT 2011 | dougt
Toyota was looked at because of the problems they had, I was led to believe that the outcome was determined to be the petal size and location. If other auto manufacturers equipment was looked at I wonder if tin wiskering would be found? I think Toy
Electronics Forum | Wed Mar 02 09:13:37 EST 2011 | aribeiju
I guess the problems are about humidity. How much time before production we need to store in Dry Unit? We have the SD532-31 SUPER DRY gabinet and we will use to store the PCBs. Thank you for your answer.
Electronics Forum | Thu Mar 24 15:58:52 EDT 2011 | davef
Just build-up the boards and ship them. Be sure to inform your customer about the problem that you have with their design and ask that the via be filled and plated over to prevent the problem in the production runs.
winsouce.jpg)
