Electronics Forum | Wed Sep 01 07:44:36 EDT 2010 | sachu_70
Dear SMT-manufacturer, I would recommend to also have other device joints on board X-ray inspected to understand if void formations are seen across the board or confined only to one component. If seen across, your "Reflow Profile" could be the cause
Electronics Forum | Wed Sep 08 21:17:05 EDT 2010 | davef
Technical data sheets from the ink supplier will: * Describe testing has been done * Recommend to their customers the limits of exposure to thermal, chemical, and mechanical conditions.
Electronics Forum | Fri Oct 01 10:07:14 EDT 2010 | mazjal7
Thank you Noid, Is the baking process product specific are they any guidelines/standard procedures? Any recommendations are appreciated. Thanks, David
Electronics Forum | Fri Dec 17 09:40:03 EST 2010 | davidmartin
Thanks guys.... I have the same issues here. We have just moved our entire plant into another, so everything has to be verified. Would anyone recommend any particular actions be taken to verify or validate equipment setups? SMT, wave and selectiv
Electronics Forum | Tue Jan 11 16:38:18 EST 2011 | gosswald
JMW, Thank you for your reply. Can you add the upward camera to this machine that does not have it after purchase? If so what is involved? I do have typically two items per board that would be below 25 mil pitch.
Electronics Forum | Wed Jan 12 07:22:02 EST 2011 | jmw
To add the camera to the machine would have a lot involved......including possible software/firmware upgrade. I would say buy a machine that already has it on it. To find the parts and upgrade it would probably cost more than the machine is worth. Ho
Electronics Forum | Wed Jan 12 09:47:14 EST 2011 | gantry
Definitely agree with JMW, most machines you find will already have the upward looking camera unless it was the first (or second) head in a multi-head system. I would not look at a C-series without the upward looking camera
Electronics Forum | Thu Jan 20 08:25:27 EST 2011 | rgduval
Dennis, Try The Waveroom Plus, in New Hampshire. They usually have T5 in stock (maybe only 1000 grams in 500g jars). They carry AIM Solder Paste. www.waveroomplus.com I receive no renumeration for this recommendation. cheers, ..rob
Electronics Forum | Thu Aug 04 12:12:27 EDT 2011 | rway
I don't believe it is the RAM. As I said, both are doing it and we are using the recommended amount of RAM for these systems. The video card is an interesting suggestion however. I will look into it.
Electronics Forum | Thu Mar 31 08:50:18 EDT 2011 | rgduval
While you're waiting, consider giving your paste manufacturer a call. They should have a database of recommended, or starting point profiles based on what oven you have. cheers, ..rob
