Electronics Forum | Fri May 18 06:49:58 EDT 2012 | kahrpr
We us a lot of 1B31 it could be one of the most common coatings out there. We do not clean the boards and do not have an issue. I would check the solder mask compatibly. I would also see how the 3rd party company is testing the boards what criteria o
Electronics Forum | Mon Apr 08 00:06:58 EDT 2013 | toddmahon
Have you had any luck? I just purchased the same machine and it has some kind of a boot error. After power up a screen pops up in Japanese with English sub titles. In the bottom left corner it reads Memory Card Data Error - Load Data. I connected to
Electronics Forum | Tue May 15 13:08:53 EDT 2012 | deanm
Dittos from A Very Frazzled Man. Money spent on a better process is almost always more advantageous than better inspection. As for manual TH insertion, have you considered a semi-automatic machine like the Contact Systems CS-400? While the "E" serie
Electronics Forum | Mon May 21 09:00:19 EDT 2012 | mosborne1
Try switching to a polymer nozzle. Your machine manufacturer may sell them on any machine shop can mill you one. Also check to see if your pick and place had a puff off function. Some older machines have a mechanical adjustment on the mac valve used
Electronics Forum | Wed May 23 12:02:46 EDT 2012 | aj
Hi, You can go a long to answering that question yourself - what do you need to see? If you are lookig for the normal stuff like bridging, opens and voids you dont need anywhere near 130-160kv. I have just completed the same excercise and we have s
Electronics Forum | Mon May 21 16:06:29 EDT 2012 | solrac
Question, I'm new to this equipment, and have been asked a Question that has me stumped. When calculating the square area for a CCA to determine the volume. What do you do if it does not cover the CCA? I have read the manual and it state that the vo
Electronics Forum | Wed Jun 06 13:33:18 EDT 2012 | upguy
As in a previous thread, we have the A12 tool tip on our TP9-UFP get sliced/damaged at random times while picking parts. Sometimes it doesn't happen for several weeks, but sometimes twice in a day. There are enough locations for the magazines neede
Electronics Forum | Thu Jun 14 00:18:05 EDT 2012 | tech1
Not trying to be negative but MYplan or MYlabel are not really going to help you with this. The most they will do is tell you what you already know: the reel is on another machine. Instead of dropping 5 to 10k on software think of how many reels you
Electronics Forum | Wed Jun 13 09:20:40 EDT 2012 | swag
We've had our share or troubles with this over the years. Flex arrays are the worst. If you machine allows search box sizing, make sure the x/y coordinates of the fids are perfect (CAD #'s only as always!) then make the search box as small as possi
Electronics Forum | Wed Jun 13 06:42:14 EDT 2012 | brettrenishaw
We have a problem with our Unleaded wave solder machine only randomly soldering some pads. I have looked at the flux level and that appears fine aswell as cheking the preheat and solder height in the bath. The probelm is not exclusive to one perticul