Electronics Forum | Tue Apr 30 13:24:00 EDT 2019 | reckless
That was a year ago, got my feet wet now and looking for something nicer but preferrably not $400k. I'm just trying to learn more about the turret technology and see if there is anything for a small tiny factory being run by a single operator/tech
Electronics Forum | Thu May 09 11:37:12 EDT 2019 | slthomas
I'm curious about what you guys do for Pb-free HASL profiling. We seldom see this finish (only on consigned boards or if they specify it directly, which is very rare) so we don't have a lot of experience. Certainly we get better results with high
Electronics Forum | Wed May 29 10:28:24 EDT 2019 | etmpalletguy
#1) Is the card in panel form: (Y)/(N) #2) PCB thickness: Thin card: YES, Thick card: See above. #3) is the PCB warping during reflow? (Y)/(N) #4) Is the PCB Symmetrical is shape & size? These are just some of the questions you need to ask yourse
Electronics Forum | Wed Jun 26 04:00:30 EDT 2019 | SMTA-David
Thanks, I'll take a look. Something else I found was the Z height for the module was set to 1.7mm but I am picking up the part on the PCB surface which is only 1.0mm from PCB being loaded, therefore the part must have been let got 0.7mm above PCB an
Electronics Forum | Fri Jul 19 11:09:29 EDT 2019 | BigFuji642
Yes we have the hard copy of the proper data on a floppy disc. If we do not have the correct Proper Data, could it give me the error below? I was thinking it would make it past the log onto machine comm server stage, and then have a different err
Electronics Forum | Tue Jun 25 23:54:54 EDT 2019 | anhsang38
Dear Everyone, I'm having problem. the Switch component drop after reflow. First, this component placed on top side and through Reflow. Next, the Bottom side is placed component and through reflow. After that, the switch drop and have a gap. We are u
Electronics Forum | Tue Jul 16 22:24:39 EDT 2019 | smttony
Hello David I see you information , Now you use the T960 samll reflow oven is can't meet your requirement anymore. According to your budget, i think the Jaguar 6 heating zones and 8 heating zones is very suit for you. I'm a sales engineer in Jaguar
Electronics Forum | Sat Jul 27 02:46:58 EDT 2019 | smttony
Hello David I'm very glad to see your demand,I'm Tony from Shenzhen Jaguar Automation Equipment Co.,Ltd. We are a professional SMT reflow oven manufacturer in China. According to your requirement , we have some solution can meet your pcb board . So
Electronics Forum | Wed Jul 17 17:56:38 EDT 2019 | rgduval
Check the MOT board. You can usually swap out the individual MOT boards, and see if the problem moves. If it does, you can isolate which board has gone bad. You can also check the encoder on the conveyor, to make sure that is still working correct
Electronics Forum | Wed Aug 07 01:38:45 EDT 2019 | robl
I've got 2, they are OK but nothing to write home about. Paste inspection is very very slow compared to Hawkeye, service costs are also pretty high, similar snagging issues on new machines as others I've seen. Don't see many day to day problems, but