Electronics Forum | Wed Jul 30 11:11:11 EDT 2003 | Roger
Has anyone changed the PD on this part lately. Sounds like a program (PD) issue. Nozzle size should be .7mm. Narrow view should be selected. Tape leaf cover on feeder should be .7mm. Make sure parts aren't on the camera lens. Good luck!
Electronics Forum | Tue Aug 05 10:01:42 EDT 2003 | Sat
You are welcome and thank you for all the inputs. You are right in that these new machines have the camera vision. Like I said in my other post, my engg's like all the machines but prefer Universal and Mydata for a bit more available flexibility like
Electronics Forum | Tue Aug 05 17:19:55 EDT 2003 | csimfgeng
Another variable is whether the ground pads have proper thermal reliefs. If the pad has solid ground plane around the perimeter, the heat being applied will quickly dissipate to the surrounding metal. A proper relief of the pad will prevent the hea
Electronics Forum | Mon Aug 11 17:42:52 EDT 2003 | Kris
How can one go about defining the complexity of a PCB for characterizing reflow profiles A large balanced board may be easier to profile than smaller unbalanced board ? Any ideas how to define an index to calculate the complexity based on size,weig
Electronics Forum | Thu Aug 21 16:00:51 EDT 2003 | nathan
I agree the Ersa Power tool is probably the most powerful iron on the market, unless you want an iron that takes two hands to hold. We have put the power tool against many irons and none have the capability or power, it should work well for you, and
Electronics Forum | Tue Sep 09 15:22:39 EDT 2003 | gdstanton
Anyone have any experience with immersion white tin over copper plating? We are seeing opens develop under BGAs after we bake and conformal coat. And when we lift the parts the pads are 60% of the original size. Need some advice on possible causes
Electronics Forum | Wed Oct 01 21:22:37 EDT 2003 | ramanandkini
We have a 1.6 mm thick automotive PCB board of size 35x70mm. One of our vendor has given us a batch with lesser soldermask thickness 5~8 microns. Will this affect the circuit board on a long term. What should be standard for the soldermask thickness?
Electronics Forum | Mon Oct 13 10:30:49 EDT 2003 | markhoch
PCB is 12.25" x 4". There are large MOSFETS on the board. Two large Electrolytic Caps. Two Large Multi-Layer Ceramic Caps. 15 C Size Tantalym Caps. A fair number of IC's, (SO-8's, SO-16's). No BGA's or finepitch of any kind. The board is double sided
Electronics Forum | Wed Dec 10 10:36:42 EST 2003 | russ
I would contact your PCB supplier, they usually have some type of software for panel optimization. Each shop potentially uses different size panels so it is a good idea to ask them what they are using and go from there. Keep in mind that there are
Electronics Forum | Fri Dec 19 01:45:02 EST 2003 | Grant Petty
Hi, Our local suppliers keep running out of passives, and it's becoming annoying. Does anyone know of any large component suppliers who sell passives, and often keep stock? We would like to find large US or overseas passive component suppliers for