Electronics Forum | Wed Mar 16 08:20:17 EST 2005 | pr
I think this has been discussed on a couple of recent threads. Check recent archives. good luck, pr
Electronics Forum | Wed Mar 16 09:12:57 EST 2005 | russ
This condition has been discussed on numerous occasions in this forum. Please do a search in the archives. Anyway, the manufacturing industry has been using lead free parts for at least ten years with lead paste. It is the other way around that is
Electronics Forum | Thu Apr 07 16:31:36 EDT 2005 | halal
Thanks for your answers! I will see them, and I'll write soon what I found helpful.
Electronics Forum | Mon May 09 08:31:23 EDT 2005 | jdengler
Grayman, You might want to read this paper. http://www.speedlinetech.com/docs/Equipment-Lead-Free-Wavesoldering.pdf Jerry
Electronics Forum | Tue Jul 19 06:17:20 EDT 2005 | Rob
Have you tried a smaller nozzle? I'm wondering if the air is escaping through the cut outs on the device on the air kiss stage.
Electronics Forum | Tue Jul 19 12:07:03 EDT 2005 | CLampron
Sr tech, It is in the PCB header information. F2 from the layout editor then F1 to view through the camera. Regards Chris
Electronics Forum | Tue Jul 19 12:10:04 EDT 2005 | CLampron
Sr. tech, The mount tool test position is what I am refering to. The function of this is to determine the placement plane of the board. The mount plane will change if the board is thicker so thickness is relavent. regards Chris
Electronics Forum | Thu Jul 21 11:13:11 EDT 2005 | Scott B
Have you tried running the machine in stepper mode (Ctrl+S). This will allow you to hold and view the machine at each stage of the placement cycle. This may help determine if it is false placement, vacuum or kiss-off. We find this useful when trying
Electronics Forum | Wed Jul 27 22:09:49 EDT 2005 | Ken
My policy is not to mix them. You have zero cross contamination potiental with this policy.
Electronics Forum | Mon Aug 01 08:38:57 EDT 2005 | kamrant
Joseph, What is the topside temp reading of your board before reaching the pot? Do you have top-heater in your wave machine? It sounds like; you got an insufficient per-heating issue.
winsouce.jpg)
