Electronics Forum: tailored (Page 1 of 6)

Re: automatic placement of pin through hole component

Electronics Forum | Wed Feb 09 17:52:24 EST 2000 | Jeff Woodruff

Look into an odd form placer. There are a number of manufacturer's out there, but it depends on the volumes that you are looking for to determine how cost effective. Odd forms can deal with bulk etc relatively easily....Buy a machine that is tailored

reflow / soldering temperature

Electronics Forum | Thu Apr 05 12:27:12 EDT 2001 | davef

I concur with your second approach. A profile needs to be tailored to the design of the board, the components, and the solder paste. Your first approach seems to try to balance lower quality soldering with a lower process complexity.

THERMAL PROFILING

Electronics Forum | Thu Apr 12 22:35:42 EDT 2001 | davef

Consider the profile recommended by your solder paste manufacturer to be the starting point to begin tailoring ramp rate, dwell times, and temperature excursions to meet the requirements of your boad design, the capabilities of your components, and t

Inspection Machine Capability

Electronics Forum | Mon May 07 16:41:55 EDT 2001 | davef

Automatic optical inspection machine suppliers seem to tailor their machines for different tasks [eg, paste inspection, component ID & positioning, reflowed solder quality]. Is this observation accurate? If not, why? If so, what characteristics of

Checklist

Electronics Forum | Tue Feb 25 13:54:09 EST 2003 | slthomas

This might be a little more that you've bargained for, but have you had a look at IPC-S-816? Obviously it needs to be tailored to your process, your quality needs, etc.

Blistering issue, mixed LF/SnPb process

Electronics Forum | Fri Jul 28 08:46:36 EDT 2006 | davef

Two lines of thought are: * That you have some solder connections points us towards components. It seems like the solderability protection on some components need to have the reflothermal recipe tailored for that component. * Paste selection is a BI

Inventory/Accounting/MFG software

Electronics Forum | Thu Feb 13 15:59:08 EST 2003 | genny

Yes Access is a definite option. We have an in-house built and tailored MRP package, that started out with Access and VB. I am not sure if it is still solely based on that or not. We have tailored it so much and worked with it so much that I doubt

Re: Industry Standards

Electronics Forum | Wed Mar 01 17:07:50 EST 2000 | Dave F

Brian: Several things: � Many CAD systems offer compliant pad design libraries � Look at IPC-SM-782 "Surface Mount Design And Land Pattern Standard" � Some times, component manufacturers have the best information about pad designs for their compone

Re: Industry Standards

Electronics Forum | Wed Mar 01 17:07:50 EST 2000 | Dave F

Brian: Several things: � Many CAD systems offer compliant pad design libraries � Look at IPC-SM-782 "Surface Mount Design And Land Pattern Standard" � Some times, component manufacturers have the best information about pad designs for their compone

Inspection Machine Capability

Electronics Forum | Tue May 08 01:01:24 EDT 2001 | ilanl

The AOI suppliers are not tailoring the systems to the application but are defining the applicability of their system to a specific AOI segment �i.e. �leveraging� the limitation of the technology. Would a AOI supplier possess a technology that will a

  1 2 3 4 5 6 Next

tailored searches for Companies, Equipment, Machines, Suppliers & Information

vision placer pnp creator

Inspection mirrors for electronic rework and repair.
ZESTRON SIR SERVICES

Best Reflow Oven
SMT feeders

ONLINE IPC Training & Certification