Electronics Forum: y2 axis (Page 1 of 1)

Universal Advantis Y1 axis error code 10201

Electronics Forum | Fri Jul 07 17:17:43 EDT 2023 | ttheis

We swapped the Y1 and Y2 pc800 controllers with no change. We swapped out the UIMC III-I cards from another machine with no change. VRM amps all look OK, no errors. The machine moves the head both in the x and y directions during the zeroing attemp

Ayuda URgente X axis GSM2 dual beam (4688A) machine error Y1 y Y2

Electronics Forum | Tue Mar 02 17:41:04 EST 2021 | astarotf

The heads in the middle of production stop and this error appears. We already checked the readers, linear encoders and changed the UIMC cards and found no errors, apparently all these revised parts are working. Can anyone help us where else can we c

Ayuda URgente X axis GSM2 dual beam (4688A) machine error Y1 y Y2

Electronics Forum | Wed Mar 03 14:25:02 EST 2021 | astarotf

Hi Spoiltforchoice Thanks for the comment. With the line encoder readers that the machine brings, we performed a positioning reading check, which showed us the increase or decrease in the path that the heads make, with which we conclude that it is re

Ayuda URgente X axis GSM2 dual beam (4688A) machine error Y1 y Y2

Electronics Forum | Wed Mar 03 10:14:45 EST 2021 | spoiltforchoice

I don't have one of these machines, but what kind of checks are you able to do on the linear encoders? On our Essemtec there is a dedicated diagnostic utility that gives you a plot of the encoder readout showing both the raw readout as a sort of roun

Recomendations? Fuji CP7 or Univ HSP4797?

Electronics Forum | Wed Nov 03 08:29:33 EST 2004 | Tim Goodman

well to add to your information .you are correct that you will get a cp8 instead of a cp7 and its cheaper.the cp7 range has been replaced by the cp8 because of the y 2 axis control that allows beter pickup of 402 and 0201 components.my moneys on the

Mirae MX200L Error code 1035

Electronics Forum | Thu Apr 30 05:22:40 EDT 2020 | bobpan

There is a sensor that monitors the temperature of the x and y1/y2 axis on the machine. You have a possible problem with the x temp sensor. There is also a temperature board that is located in the leg area below the keyboard. I am attaching a picture

GSM2 Y-axis resonance

Electronics Forum | Wed Jun 01 19:37:15 EDT 2016 | marcelll

You can try to null the axis, it's working sometime Also, lower the acceleration to 2000 instead of 4000 and the max velocity to 350 instead of 508. You can also try to swicht the Y1 driver with Y2 driver Do you have the AMC disks to troubleshoot ?

  1  

y2 axis searches for Companies, Equipment, Machines, Suppliers & Information

SMT spare parts - Qinyi Electronics

Reflow Soldering 101 Training Course
Selective soldering solutions with Jade soldering machine

Wave Soldering 101 Training Course
Equipment Auction Automotive Electronics Supplier - Closure of Tier-One SMT Dvision: (10) ASM & Universal SMT Lines & Feeders Equipment as-new-as 2019! Dek | Koh Young | Speedline | Vitronics | Viscom

Best Reflow Oven
Pillarhouse USA for handload Selective Soldering Needs

Training online, at your facility, or at one of our worldwide training centers"
PCB Depanelizers

Low-cost, self-paced, online training on electronics manufacturing fundamentals