Electronics Manufacturing Technical Articles

Going Lead Free With Vapor Phase Soldering - Lead Free Is Still a Challenge For Major Industries.

Jan 30, 2014 | Andreas Thumm

As of today, the electronic industry is aware of the requirements for their products to be lead free. All components are typically available in lead free quality. This comprises packages like BGAs with BGA solder balls to PCB board finishes like HASL. The suppliers are providing everything that is needed. It is harder to get the old tin leaded (SnPb) components for new applications today, than lead free ones.

So why has not everybody changed over fully yet and how can the challenges be overcome?

A big concern in this transition process is reflow soldering. The process temperatures for lead free applications became much higher. Related with this is more stress for all the components. It affects the quality and reliability of the electronic units and products......

Publisher: IBL - Löttechnik GmbH

Testing Intermetallic Fragility on Enig upon Addition of Limitless Cu

Jan 23, 2014 | Martin K. Anselm, Ph.D. and Brian Roggeman Universal Instruments Corp.

As reliability requirements increase, especially for defense and aerospace applications, the need to characterize components used in electronic assembly also increases. OEM and EMS companies look to perform characterizations as early as possible in the process to be able to limit quality related issues and improve both assembly yields and ultimate device reliability. In terms of BGA devices, higher stress conditions, RoHS compatible materials and increased package densities tend to cause premature failures in intermetallic layers. Therefore it is necessary to have a quantitative and qualitative test methodology to address these interfaces....

Publisher: Universal Instruments Corporation

Advanced Rework Technology and Processes for Next Generation Large Area Arrays, 01005, PoP and QFN Devices.

Jan 16, 2014 | Brian Czaplicki, Director, Technical Marketing Programs, Air Vac Engineering Co., Inc.

BGA Rework is now largely mature, although new supplemental processes that provide improved process control such as Solder Paste Dipping and Non-Contact Site Cleaning can now be integrated into existing processes if the rework technology that is used allows. So what are the next set of challenges that will need to be addressed in regard to Area Array and SMT Rework? The International Electronics Manufacturing Initiative or iNEMI has recently published its 2013 Technology Roadmap for the global electronics industry which includes a section dedicated specifically to rework and repair. Of particular interest and importance is iNEMI’s gap analysis which identifies future specific gaps and challenges that will result from such factors as government regulations, disruptive technologies and new product requirements....

Publisher: Air-Vac Engineering Co., Inc.

Embedded Passive Technology

Jan 09, 2014 | Hikmat Chammas

Embedded Passive Technology is a viable technology that has been reliably used in the defense and aerospace industry for over 20 years. Embedded Passive (Resistors and Capacitors) Technology have a great potential for high frequency and high density applications. It also provides better signal performance, reduced parasitic and cross talk. This paper summarizes the selection of resistor embedded materials, evaluations of resistive material (Phase 1) and duplication of a complex digital design (Phase 2). Phase 1 –resistive materials (Foil 25Ω/sq NiCr and 1kΩ/sq CrSiO) and resistive-Ply materials (25Ω/sq and 250Ω/sq NiP) were chosen for evaluation....

Publisher: Honeywell International

Thermal Shock and Drop Test Performance of Lead-free Assemblies with No-Underfill and Corner-Underfill

Jan 02, 2014 | Bankeem Chheda and S. Manian Ramkumar, Ph.D.; Rochester Institute of Technology-CEMA, Reza Ghaffarian; Ph.D. Jet Propulsion Laboratory.

With ROHS compliance the transition to lead-free is inevitable. Several lead-free alloys are available in the market and its reliability has been the main concern. The results from this experimental research aims at making a comparison of different lead-free alloy combinations. Thermal shock and drop tests are a part of this experimental study....

Publisher: Jet Propulsion Laboratory

Addressing the Challenge of Head-In-Pillow Defects in Electronics Assembly

Dec 27, 2013 | Mario Scalzo Senior Technical Support Engineer CSMTPE, Six-Sigma Black Belt

The head-in-pillow defect has become a relatively common failure mode in the industry since the implementation of Pb-free technologies, generating much concern. A head-in-pillow defect is the incomplete wetting of the entire solder joint of a Ball-Grid Array (BGA), Chip-Scale Package (CSP), or even a Package-On-Package (PoP) and is characterized as a process anomaly, where the solder paste and BGA ball both reflow but do not coalesce. When looking at a cross-section, it actually looks like a head has pressed into a soft pillow. There are two main sources of head-in-pillow defects: poor wetting and PWB or package warpage. Poor wetting can result from a variety of sources, such as solder ball oxidation, an inappropriate thermal reflow profile or poor fluxing action. This paper addresses the three sources or contributing issues (supply, process & material) of the head-in-pillow defects. It will thoroughly review these three issues and how they relate to result in head-in pillow defects. In addition, a head-in-pillow elimination plan will be presented with real life examples will be to illustrate these head-in-pillow solutions....

Publisher: Indium Corporation

Mixed Metals Impact on Reliability

Dec 19, 2013 | Rick Gunn, Vice President of Engineering / Chief Technology Officer, Nextek Incorporated.

With the adoption of RoHS and implementation of Lead Free solders a major concern is how this will impact reliability. Both commercial and military hardware are impacted by this change even though military hardware is considered exempt from the requirements of RoHS. As the supply chain has moved to the new lead free alloys both markets are being forced to understand these impacts and form risk mitigation strategies to deal with the change. This paper documents the effect of mixing Leaded and Lead Free alloys on BGA devices and how this impacts reliability. Three of the most common pitch BGA packages are included in the study to determine if the risk is the same as pitches decrease...

Publisher: Nextek

Using Physics of Failure to Predict System Level Reliability for Avionic Electronics

Dec 11, 2013 | Greg Caswell, Sr. Member of the Technical Staff, DfR Solutions

Today's analyses of electronics reliability at the system level typically use a "black box approach", with relatively poor understanding of the behaviors and performances of such "black boxes" and how they physically and electrically interact (...) The incorporation of more rigorous and more informative approaches and techniques needs to better understand (...) Understanding the Physics of Failure (PoF) is imperative. It is a formalized and structured approach to Failure Analysis/Forensics Engineering that focuses on total learning and not only fixing a particular current problem (...) In this paper we will present an explanation of various physical models that could be deployed through this method, namely, wire bond failures; thermo-mechanical fatigue; and vibration....

Publisher: DfR Solutions (acquired by ANSYS Inc)

Impact of FPC Fabrication Process on SMT Reliability

Dec 05, 2013 | Susie Krzmarzick, John Dzarnoski, Yangjun Xing.

The functionality of electronic devices continues to increase at an extraordinary rate. Simultaneously consumers are expecting even more and in ever smaller packages. One enabler for shrinking electronics has been the flexible circuit board that allows the circuit board to fit a wide variety of shapes. Flexible printed circuits (FPC) have the capability to be very thin and can have unpackaged components directly attached using surface mount technology (SMT) and flip chip on flex technologies. Bare die can also be thinned and attached very close to the circuit board. However one caveat of high density flexible circuit boards with thin die is that they can be very fragile. The use of back side films and underfill can protect the die making circuits more robust. For underfill to work well it requires good adhesion to the circuit board which can mean that flux residues under the die normally must be removed prior to underfilling. ...

Publisher: Starkey Hearing Technologies

Improving Density in Microwave Multilayer Printed Circuit Boards for Space Applications

Nov 27, 2013 | Olivier Vendier, Jean-Louis Cazaux, Jean-Luc Lortal; Thales Alenia Space.

The need in complexity for microwave space products such as active BFNs (Beam Forming Networks) is increasing, with a significantly growing number of amplitude / phase control points (number of beams * numbers of radiating elements). As a consequence, the RF component’s package topology is evolving (larger number of I/Os, interconnections densification ...) which directly affect the routing and architecture of the multilayer boards they are mounted on. It then becomes necessary to improve the density of these boards (...) This paper will present the work performed to achieve LCP-based high density multilayer structures, describing the different electrical and technological breadboards manufactured and tested and presenting the results obtained....

Publisher: THALES