Controlling Voiding Mechanisms in the Reflow Soldering Process
Published: |
November 15, 2017 |
Author: |
Keith Sweatman, Takatoshi Nishimura, Kenichiro Sugimoto, Akira Kita |
Abstract: |
While a significant level of voiding can be tolerated in solder joints where electrical conductivity is the main requirement, voiding at any level severely compromises thermal conductivity. For example, in LED lighting modules effective conduction of heat through the 1st level die attach to the substrate and then through the 2nd level attach to the heat sink is critical to performance so that voiding in the solder joints at both levels must be minimized. (...) In this paper, the authors will review the factors that influence the incidence of voids in small and large area solder joints that simulate, respectively, the 1st and 2nd level joints in LED modules and discuss mitigation strategies appropriate to each level. They will also report the results of a study on the effect on the incidence of voids of flux medium formulation and the optimization of the thermal profile to ensure that most of the volatiles are released early in the reflow process.... |
You must be a registered user to talk back to us. |
Company Information:
More articles from Nihon Superior Co., Ltd. »
- Jun 20, 2019 - Dissolution in Service of the Copper Substrate of Solder Joints
- Feb 28, 2013 - Effect of Cooling Rate on the Intermetallic Layer in Solder Joints
- Apr 08, 2008 - Strength of Lead-free BGA Spheres in High Speed Loading
- Mar 31, 2008 - High Reliability Lead-free Solder SN100C?Sn-0.7Cu-0.05Ni?Ge?
- See all SMT / PCB technical articles from Nihon Superior Co., Ltd. »
More SMT / PCB assembly technical articles »
- Aug 20, 2024 - Thermal Interface Materials Drive Electronic Innovation | GPD Global
- Aug 20, 2024 - Underfill Materials Dispensing in Electronics Manufacturing Applications | GPD Global
- Jul 15, 2024 - Transforming LED Manufacturing: I.C.T Engineers Set Up Complete Production Line in Tajikistan | I.C.T ( Dongguan ICT Technology Co., Ltd. )
- Jun 20, 2024 - Case study: Precise Coating on Electronic Hearing Devices | ASYMTEK Products | Nordson Electronics Solutions
- Mar 19, 2024 - What is Underfill | GPD Global
- Browse Technical Library »
Controlling Voiding Mechanisms in the Reflow Soldering Process article has been viewed 1558 times