• SMTnet
  • »
  • Technical Library
  • »
  • Bare PCB inspection for Track cut, Track Short and Pad Damage using simple Image Processing Operations

Bare PCB inspection for Track cut, Track Short and Pad Damage using simple Image Processing Operations

Published:

May 6, 2021

Author:

Anitha D B, Mahesh Rao

Abstract:

In this paper most commonly occurring Bare PCB defects such as Track Cut, Track short and Pad Damages are detected by Image processing techniques. Reference PCB without having any defects is compared with test PCB having defects to identify the defects and x-y coordinates of the center of the defects along with radii are obtained using Difference of Gaussian method and location of the individual type of defects are marked either by similar color or different colors. Result Analysis includes time taken for the inspection of a single defect, multiple similar defects, and multiple different defects. Time taken is ranging from 1.674 to 1.714 seconds if the individual type of defects are marked by different colors and 0.670 to 0.709 seconds if all the identified defects are marked by the same colors....

  • Download Bare PCB inspection for Track cut, Track Short and Pad Damage using simple Image Processing Operations article
  • To read this article you need to have Adobe PDF installed

You must be a registered user to talk back to us.

 
Company Information:

Vidya Vikas Institute Of Engineering And Technology

Vidya Vikas Institute of Engineering & Technology (V.V.I.E.T) was established in 1997. It is a Private University of Engineering and Technology and has been ranked as one of the top 10 engineering colleges in Mysore, Karnataka.

Alanahally, Mysuru, Karnataka, India

School

  • Phone +91 821 247 1232

Vidya Vikas Institute Of Engineering And Technology website

Company Postings:

(1) technical library article

  • Jun 15, 2021 - Dispensing EMI Shielding Materials: An Alternative to Sputtering | Nordson ASYMTEK
  • Feb 20, 2021 - Humitectorâ„¢ Type 2 Non-Reversible Humidity Indicator Cards from Clariant help assure the integrity of moisture-sensitive surface-mount devices | Clariant Cargo & Device Protection
  • Jan 03, 2021 - Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP and Flip Chip Technologies | SMTnet
  • Dec 07, 2020 - A Non-destructive Approach to Identify Intermittent Failure Locations on Printed Circuit Cards (PCC) that have been Temperature Cycle Tested | ACI Technologies, Inc.
  • Dec 02, 2020 - SMT007-MIRTEC Intelligent Factory Automation Article-November 2020 | MIRTEC Corp
  • Browse Technical Library »

Bare PCB inspection for Track cut, Track Short and Pad Damage using simple Image Processing Operations article has been viewed 92 times

  • SMTnet
  • »
  • Technical Library
  • »
  • Bare PCB inspection for Track cut, Track Short and Pad Damage using simple Image Processing Operations
2021  IPC Training Schedule

Manufacturing Software