Philips Topaz

Model:	Philips Topaz
Category:	Pick and Place/Feeders
Condition:	used
Location:	USA
Offered by:	Key Tech Solutions
	Contact Supplier

Philips Topaz manufactured in 1998, lowhours. Left to right with 8 heads for high speed placement. Good working condition.

Overview details:

The Topaz is a member of the top-of-the-line GemLine of Philips’ SMD Pick &

Place machines. The Topaz is a flexible, medium volume chip-shooter that can

handle a wide range of components at speeds up to 14,000 SMDs per hour. The

machine is built around a very rigid, vibration-free frame for improved accuracy and

long-term stability and is perfectly suitable for round-the-clock production. The vision system with line sensor camera allows fast and accurate

“on-the-fly” alignment of a wide range of components from 0402 up to 25 mm

square PLCC, including 21 mm square ICs with lead pitches down to 0.65 mm (25

mil). Board conveyor width is automatically adjustable, allowing board dimensions up to 457 x

407 mm (18" x 16") to be handled.

 Detailed Specs:

Optimal placement rate: 14,000 components per hour (cph)

Applicable Components: 0402 - SOP, SOJ, PLCC 25 mm (1.0") Line sensor camera system

QFP 21 mm (0.83") with pin pitch down to 0.65 mm (25 mil) Line sensor camera system

QFP 32 mm (1.26") with pin pitch down to 0.5 mm (20 mil) Optional area CCD camera system

Max. component height: 6.5 mm

Mounting accuracy: (x,y) 3s
0.08 mm for chips and SOIC Line sensor camera system

0.06 mm for QFPs Using Precision Head and optional

area CCD camera system

Mounting angle: 0 up to ± 180 (steps of 0.01)

Alignment system: Line sensor camera with fore light system for Vision-on-the-Fly;

image processing by VICS 2500 proprietary vision system

Second Line sensor camera for rear side is optional (Max. Board

width is limited to 300 mm (11.8")

Area CCD camera for fine pitch components Optional

Area CCD camera for fiducial alignment Standard

Type of nozzles: Type 31

Type 31-1 (Precision Head only, spring loaded)

Type 32-2

Type 33

Type 34

Type MELF

The nozzle types for Topaz and Emerald are the same. Standard

will be delivered: 7x nozzle 31,

1x nozzle 31-1, 2x nozzle 32-2,

1x nozzle 33,

1x nozzle 34, 1x nozzle MELF

Nozzle exchange station: 12 nozzle positions

Number of heads: One single beam with 8 exchangeable nozzles Including one Precision Head

Placement heads: actuation method:

Pneumatic or servo controlled for component height compensation

Number of feeders: Tape feeders if 8 mm: 100 positions