Quadtech 1920

Quadtech 1920

Quadtech 1920


Quadtech 1920


In-Circuit Testers




Florida, USA

Offered by:

Test Equipment Connection

  Contact Supplier

Quadtech 1920

20 Measurement Parameters: Measure and display any two of 15 impedance parameters simultaneously, with a basic accuracy of 0.1%. Additionally the 1920 can measure the DC resistance, or display the current through or voltage across a test device ensuring the operator of the real test conditions.

Wide Frequency: Over 27,000 user programmable test frequencies to fully characterize devices over the range of 20 Hz to 1 MHz.

Automatic Test Sequencing: For increased productivity and throughput the 1920 can perform up to six different tests in sequence with a single push of the start button. Each test can have different measurement parameters, test conditions and limits.

DC Bias Voltage: The instruments internal DC bias voltage source, programmable from 0 to 2 V in 1 mV steps, allows capacitors to be tested under real DC bias conditions.

Setup Storage/Recall: The test operator has the ability to store and recall, from internal memory, up to 30 single test setups and 10 sequential setups (six tests in sequence). The front panel can be locked out, with password protection, to ensure that procedures are run the same way every time.

Load Correction: Substantially improves instrument accuracy by allowing the operator to specify the value of a known standard, measure it, and apply a correction to ongoing measurements.

Programmable Source Impedance: The operator is able to set instrument source impedance at 5, 25, 50 or 100 ohms, an important feature when comparing measurements to those made on other testers. Measurement results can vary substantially based solely on the source impedance of the tester being used.

Why Buy?

    For a wide test frequency range (to 1MHz) at an affordable price

    When both AC impedance and DC resistance measurements are needed

    For automated production testing using RS232, IEEE-488 & PLC interfaces

    When internal bias voltage is required for testing capacitors

    Configure instrument and log results to PC using 1900 Virtual Front Panel


    Measures 15 Impedance Parameters, DC Resistance, Voltage and Current

    0.1% Basic Measurement Accuracy

    27,000 Programmable Frequencies from 20Hz to 1MHz

    AC Test Voltage Programmable from 20mV to 1V

    Internal DC Bias Voltage, Programmable from 0 to 2V

    Fast Measurement Speeds up to 40/Second

    Automatic Open/Short Zeroing Eliminates Connection Errors

    LCD Display for Menu Programming and Test Results

    14 Hi/Lo Sorting Bins for Pass/Fail Testing

    USB, RS232, IEEE-488 and PLC Interfaces all Standard

    Results Displayed as Deviation or %Deviation from a Nominal Value

    Internal Storage and Recall of 30 Test Setups

    Monitor Voltage and Current to the Device Under Test

    Constant Voltage Maintained to the Device Under Test

    Ability to Automatically Perform 6 Unique Tests in Sequence

    Keypad Lockout Prevents Changes to the Test Setup

    Programmable Average and Delay Times

    Automatic Correction for Different Test Lead Lengths

Company Information:

The Worlds Largest Distributor of New, Refurbished, and Second Hand Electronic Test and Measurement (T&M) Equipment.

Lake Mary, Florida, USA

Equipment Dealer / Broker / Auctions, Manufacturer

  • Phone 407-804-1299
  • Fax 407-804-1277

See Supplier Website »

Company Postings:

(3842) used SMT equipment marketplace items

(69) products in the catalog

(26) news releases

SMT Equipment & PCB Assembly Machines RFQ

This Quadtech 1920 has been added in 23 Apr 2013

This Quadtech 1920 has been viewed 270 times.

Fluid Dispensing, Staking, TIM, Solder Paste

One stop service for all SMT and PCB needs