New Inline Printer For Fine Pitch

The fast 2-point-vision system provides a precise alignment of every PCB. The two cameras look straight through the stencil onto the PCB. Any of the pads can be used for alignment. The advantages: First, printing is executed just after alignment without any further movement and second, there is no need for additional alignment marks in the stencil. If the stencil's opening is smaller than the pad, then it is aligned exactly in the centre of the pad.

The programmable print head provides absolute reproducible results all over the print range. The squeegee pressure is measured and regulated continuously during printing. Therefore, constant conditions are achieved especially in the peripheral zone of the substrate. This enables the designer to use even the rim of a PCB for component placement.

The control software is based on the Windows operating system. It is easy to learn and simple to operate with the built-in mouse and keyboard. All printing parameters are programmable and the storage capacity for printing programs is unlimited.

The inline conveyor system is programmable and automatically aligned to the correct width. Stencils are tensioned in an universal frame and can be exchanged quickly.

The SP200-AVC is built very rigid which guarantees long-term reliability and accuracy. Frames of 584x584 mm (23x23�) can be mounted, the maximum printing area is 400x360 mm (15.7x14.2�).

ESSEMTEC is the leading manufacturer of flexible production equipment for electronics. A complete production line with printer, dispenser, pick and place and reflow oven is available from one source including the required process know how.

ESSEMTEC AG

Mosenstrasse 20

CH-6387 Aesch/LU

Switzerland

Tel +41-(0)41-919 60 60

Fax +41-(0)41-919 60 50

email info@essemtec.com

web www.essemtec.com